Programmed Playback (Audio CD only)

1 CLEAR

2

3

You can play up to 30 tracks in a desired order.

<Insert a disc before programming.

1Enter the program mode. Press the PROGRAM button.

Stop PROGRAM

P-00 T00

<You cannot program during playback.

2Select a track using the numeric buttons. Example: to select track/file 15

Stop PROGRAM

P-01 T15

Program

 

number

Selected track number

 

Repeat the selection until you finish programming desired tracks.

<If you attempt to program more than 30 tracks, ”P-full” (Program is full) appears and no more tracks can be programmed.

<To correct a selection, press the CLEAR button. The last programmed track is cleared.

<If you press the stop button (H), all the programmed tracks are cleared.

3Start programmed playback. Press the play/pause button (G/J).

<“PRG” is displayed during programmed playback and while it is stopped.

<Playback stops automatically after all programmed tracks are played.

16

Note

<When you stop programmed playback, the total number of the programmed tracks and total time are shown on the display.

<When you press the SHUFFLE button during programmed playback or you press the SHUFFLE button then press the play/ pause button (G/J) while programmed playback is stopped, shuffle playback starts, but program mode will not be cancelled. You can return to the programmed playback by stopping shuffle playback and pressing the play/pause button (G/J).

To stop programmed playback

Press the stop button (H).

<When the stop button (H) is pressed, playback stops, but program mode will not be cancelled. You can return to programmed playback by pressing the play/pause button (G/J).

To check the programmed order

Press the PROGRAM button repeatedly while playback is stopped.

The track number and program number are shown on the display. “P-end” appears at the end of the program.

<To return to the normal display of programmed playback, start and stop programmed playback.