A LINE OUT jacks

These jacks transmit an analog 2-channel audio signal. Connect them to the CD jacks of a receiver or an amplifier with the provided RCA cables.

<Make sure to connect the cables as follows: White plug qWhite jack (L: left channel) Red plug qRed jack (R: right channel)

White (L)

White (L)

Red (R)

Red (R)

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

B DIGITAL OUT jack

Connect it to a digital coaxial input terminal of a digital apparatus such as a CD recorder with a commercially-available digital coaxial cable.

<Make sure that the cable is firmly inserted.

C SYSTEM CONTROL jack

If you have TEAC AG-H600 series receiver, convenient system control functions are available.

Connect it to the SYSTEM CONTROL jack on the AG-H600 series receiver with the provided system control connection cord. Then set the SYSTEM CONTROL SELECTOR switch on this unit to “SYSTEM”. (See D .)

Available system control functions are as follows:

NWhen you turn on or standby the AG-H600 series receiver using the remote control unit (RC-1181) of the receiver, this unit is also turned on or standby synchronously.

NWhen you change the source from CD to another on AG-H600 series receiver, playback stops and display turns off on this unit.

Refer also to the manual of the AG-H600 series receiver.

D SYSTEM CONTROL SELECTOR switch

When you want to use the system control functions, connect the SYSTEM CONTROL jacks (see C ), and set the switch to “SYSTEM”.

<The STANDBY/ON button on the remote control unit of this unit does not work while the switch is set to “SYSTEM”.

<When you do not use the system control functions or do not have a AG-H600 series receiver, set the switch to “SINGLE“. Otherwise, you cannot turn on or standby the unit.

E SIGNAL GND terminal

Connect the signal ground of other components using a commercially available jacketed cable (PVC-covered cable or others).

<Note that this is NOT an electrical safety ground (earth).

F AC Inlet

Use only the supplied power cord.

<Use of other power cord may result in fire or electric shock.

<Unplug the power cord when you are not going to use the unit for an extended period of time.

ENGLISH

9