Remote Control Unit

The supplied remote control unit allows the unit to be operated from a distance.

When using the remote control unit, point it towards the remote sensor within 60° horizontally and 20° vertically of the front of the unit.

<Even if the remote control is used within its effective operation range (16ft/5 m), the unit might not respond to the remote if there are any obstacles between them.

<The remote control might function incorrectly if it is operated near other products that generate infrared rays or if other remote control devices that use infrared rays are operated near the unit. Likewise, the other products might also function incorrectly.

Battery installation

Remove the battery compartment cover.

Put the lithium-ion battery (CR2025, 3 V) in with the “+” side up.

Close the cover.

Battery replacement

If the distance required between the remote control unit and main unit decreases, the battery is exhausted. In this case, replace the battery with a new one.

<For information about the collection of batteries, please contact your local municipality, your waste disposal service or the place where you purchased them.

Battery Precautions

<Be sure to insert the battery with the positive “+” and negative “-” polarities correctly positioned.

<If the battery leaks, wipe away the leakage inside the battery compartment and replace the battery with a new one.

<If the remote control unit is not to be used for a long time (more than a month), remove the battery from the remote control unit to prevent it from being exhausted.

<Do not use any batteries other than those specified.

<Do not heat or disassemble batteries. Never throw them in fire or water.

<Do not carry or store batteries with other metallic objects. The batteries could short circuit, leak or explode.

14