Wake Up Timer

You can set the unit to turn on at specific times.

<Adjust the clock before setting the wake up timer (page 15).

Setting the wake up timer

1If the unit is on, press the STANDBY/ON ( ) button to turn it off.

2Press the TIMER button repeatedly until “ALM SET” appears on the display.

The clock hour value blinks.

<If no button is pressed for 30 seconds, the timer setting mode will be cancelled.

3Press the VOLUME ( + / – ) buttons to set the hour, then press the TIMER button.

The clock minute value blinks.

30

4Press the VOLUME ( + / – ) buttons to set the minute, then press the TIMER button.

The current setting value blinks.

5Press the VOLUME ( + / – ) buttons to select “ON”, then press the TIMER button.

The timer set has been set. “ON” and the current time is displayed.

When the setting time arrives, the last selected source starts playback.

<To turn off the wake up timer, select “OFF” in step .

When the timer reaches the timer-on time, the unit is set to “SLEEP 60” automatically and the power will be switched off (standby) 60 minutes later.

If you want to listen continuously, press the SLEEP button repeatedly to select “--” after reaches the timer-on-time.

Note for use with an iPod touch

(When using SR-100i wake up timer with an iPod touch as the source)

<If you turn the power of the iPod touch off (“Slide to power off”), you cannot use it with the wake up timer even if it is docked in this unit. To use the wake up timer with an iPod touch as the source, do not select “Slide to power off” on the iPod touch. (The screen of the iPod touch can be turned off without any problem.)

<If Video is displayed on the iPod touch’s screen, you cannot use it with the wake up timer even if it is docked in this unit. To use the wake up timer with an iPod touch as the source, select any item other than Video on the iPod touch.