iPod

Listening to an iPod

1Push the “TEAC” mark on the front of this unit to open the iPod dock.

2Connect an iPod to the dock.

The iPod automatically turns on and starts playback from the iPod’s play list.

If an iPod is already connected, press the FUNCTION button repeatedly to select “IPod”. Playback starts automatically.

<The battery of an iPod is recharged whenever the iPod is docked and SR-100i is connected to the AC power supply.

Some of the iPod devices cannot be recharged through the dock. For details of recharging compatibility, see page 8.

<When you turn off the unit with an iPod connected to the dock, the clock appears on the display and the iPod battery is charged. If you disconnect the iPod and no button is pressed for 90 seconds, the unit is turned off (put in standby) and the STANDBY indicator lights.

<If headphones are plugged into the iPod, sound comes out from both the headphones and the speakers of SR-100i.

Note for iPod touch

If you want to hear the sound of video from an iPod touch, connect the iPod touch to the dock first, then operate SR-100i and the iPod touch.

18

Stopping playback temporarily (Pause mode)

During playback, press the Play/Pause (G/J) button. Playback stops at the current position.

To resume playback, press the Play/Pause (G/J) button again.

To skip to the next or previous track

During playback, press the Skip (.//) button repeatedly until you find the desired song.

The selected song will be played from the beginning.

<If the . button is pressed once during playback, the current song will be played from the beginning.

Searching for a part of a track

Hold down

During playback, hold the Skip (.//) button to search a part of a song.

Release it when you find the part you want to listen to.