Listening to an External Source

See pages 6 - 7 “Connections”.

1Connect a portable audio player to the AUDIO jacks using the supplied RCA pin-stereo mini plug cable (pages 6 - 7 ).

2Press the FUNCTION button repeatedly to select “AUX”.

3Play the source, and adjust the volume using the VOLUME buttons and the connected portable audio player.

<When using the headphones jack of the component, if you do not adjust its volume, you might not hear any sound from SR-80i.

<Turning the volume of the connected component up too high might cause the sound from SR-80i to be distorted. In this case, reduce the volume of the component until the distortion stops and then adjust the volume level of SR-80i to a comfortable listening level.

26

Wake Up Timer

The unit can be programmed to turn on and standby at a specified time.

You can set the unit to play an iPod/iPhone, FM/AM radio or a USB flash memory.

You can also set two separate timers with ALARM 1 and ALARM 2.

Setting the wake up timer

The procedures below are to set ALARM 1.

Follow similar steps to set ALARM 2.

oThis operation is available in every sound source.

1 Press and hold the ALARM 1 button for more than 2 seconds.

Hold down

more than 2 sec.

Example:

“ON TIME” appears on the display.

The clock hour value and the wake up timer indicator ( ) blink.

oIf no button is pressed for more than 10 seconds, the wake up timer setting mode will be cancelled.

2Press the Skip (.//) buttons to set the on time (hour), and then press the ALARM 1 button.

The minutes value blinks.