AUSB port

Connect an external USB flash memory to this port.

BVIDEO OUT jack

This terminal outputs video signal from an iPod/ iPhone connected to the dock of the SR-80i.

Connect the unit to the composite video connector of a television or monitor using the supplied RCA (pin) video cable.

<When you output video to a TV from your iPod/ iPhone, the video is not displayed on the iPod/ iPhone’s screen.

<If your iPod/iPhone has “TV OUT” menu, select “On” or “Ask”. Or the iPod/iPhone will not output video signal. When you have set “TV OUT” to “Ask”, each time you play a video your iPod prompts you to specify whether to output it to a TV.

CDC IN

Connect the supplied AC adapter (PS-M1628) to this jack. Then, connect the connector of the power cord set to the AC adapter.

After all other connections are complete, connect the power cord's plug to an AC wall socket.

Use the supplied AC adapter (PS-M1628). Do not use any AC adapter other than the one included with this unit.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

<If you are not going to use the unit for some time, disconnect the power cord from the wall socket.

DAUDIO jacks

Analog 2-channel audio signal is input from these jacks. Connect a portable audio player using the supplied RCA pin-stereo mini plug cable.

Make sure to connect:

White plug e White jack (L: left channel)

Red plug e Red jack (R: right channel)

< When using the headphones jack of the component,

 

if you do not adjust its volume, you might not hear

 

any sound from SR-80i.

 

< Turning the volume of the connected component

 

up too high might cause the sound from SR-80i to

 

 

be distorted. In this case, reduce the volume of the

ENGLISH

component until the distortion stops and then adjust

 

the volume level of SR-80i to a comfortable listening

 

level.

 

 

 

E FM antenna terminal

Connect the supplied FM antenna. Extend fully and position for the best reception and attach it to a window frame or wall with thumbtacks or the like.

F AM antenna terminal

Connect the supplied AM loop antenna to the AM antenna terminal. Place the antenna in the direction which gives the best reception.

To stand the loop antenna on a surface, fix the claw to the slot in the antenna base.

7