Nap Alarm
You can set a Nap Alarm so that a buzzer sounds after a set amount of time. The buzzer sounds for 5 minutes.
Press the NAP button repeatedly until the desired time appears on the display.
The NAP indicator ( 
) appears on the display.
30, 60, 90, or 120:
Depending on the selection, the buzzer will sound after 30, 60, 90, or 120 minutes.
OFF:
The Nap Alarm is OFF.
<If you want to check the time remaining until the nap alarm buzzes, press the NAP button once. The remaining time will be displayed for a few seconds.
<After the Nap Alarm has been set, it will function even if the unit is put into standby mode.
Caution:
The buzzer sound is loud, so do not use headphones when the Nap Alarm is on.
To stop the alarm
When the buzzer sounds after the set time elapses, press the SNOOZE/DIMMER button to stop the buzzer for 10 minutes. It will sounds again after 10 minutes.
To turn the Nap Alarm off completely, press the NAP button again.
Wake Up Timer
The unit can be programmed to turn on at a specified time.
The unit turns on when the timer reaches the ON time. Then, after 120 minutes the unit will switch to standby. Or the buzzer sounds for 5 minutes.
You can set two different timers separately with ALARM 1 and ALARM 2.
<Adjust the clock before setting the timer (page 12).
Setting the Wake Up Timer (When using the Alarm 1 button)
1Press and hold the ALARM 1 button for more than 2 seconds.
The clock and the timer indicator ( 
) appear on the display and blink.
<If no button is pressed for about 8 seconds, the timer setting mode will be canceled.
At their default settings, Alarm 1 is set for 6:00 AM and Alarm 2 is set for 7:00 AM.
<If you want to restore the unit to the default f ac tor y set tings, press and hold the SNOOZE/DIMMER button for more than 5 seconds.
21
ENGLISH