Troubleshooting
If you have problems with your system, read this page and try to solve the problem yourself before calling your dealer or TEAC service center.
General
No power.
eCheck the connection to the AC power supply. Check whether the AC source is a switched outlet or not and, if it is, that the switch is turned on. Confirm that there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet.
eThe fuse might be blown. Replace it with a T2 AL 250V fuse. Do not use a different t yp e of f use. Doing so could cause e xcessive heat generation or other abnormal behavior that could lead to malfunction or fire.
No sound from speakers.
eSelect the source by pressing the TUNER button, the AUX button, or the iPod button (y/J).
eAdjust the volume.
eRemove the headphone plug from the PHONES jack.
Remote control does not work.
ePress the STANDBY/ON switch to turn the unit on.
eIf the battery is exhausted, replace it with a new one.
eUse the remote control unit within the operation range (5 yd) and point it at the remote sensor on the front panel.
eRemove obstacles between the remote control unit and the main unit.
eIf a bright light is near the unit, turn it off.
24
The sound is noisy.
eThe unit is too close to a TV or similar device. Relocate the unit farther away from such devices, or turn them off.
iPod Player
Cannot insert the iPod. eAdjust the dock adapter.
eRemove dust or obstacles from the
iPod will not play.
eRemove the iPod from the dock, wait a few seconds, and insert it again.
eA sof t ware up date might solve the problem. Visit the Apple website and download the latest iPod Software.
Cannot operate the iPod.
eTurn off the HOLD switch of the iPod.
Tuner
Cannot listen to any station, or the signal is too weak.
eTune in the station properly.
eMove the antenna for FM or the main unit for AM until you receive stations clearly.
If normal operation cannot be restored, unplug the power cord from the outlet and plug it in again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they might damage the surface of the unit. Allow the surface of the unit to dry completely before using it.