Repeat mode

Use the REPEAT button to select the repeat mode for playback. Repeated presses of the REPEAT button cycle between the following options:

REPEAT TRK

 

REPEAT DSC

 

 

 

(track repeat)

 

(whole disc repeat)

REPEAT OFF (no repeat)

<Halting playback stops the repeat mode.

Track repeat

When this is selected, the currently-selected track repeats. If another track is selected during repeat playback, the newly- selected track repeats.

Disc repeat

The whole contents of the disc are repeated.

Display dimming

The display on the main unit can be dimmed to suit the environment in which you listen to music. There are three levels and an “off” setting.

Use the FL DIMMER button to cycle between these settings.

<Note that the OFF setting is not memorized when the power is turned off. When the unit is switched off with the display off, and then turned on again, the display is reset to the minimum brightness.

<In OFF mode, when you press a button such as PLAY, the illuminations turn temporarily on.

Changing the display mode

During playback, it is possible to change the display as shown here.

Currently playing track

Elapsed time of

 

current track

Time remaining for current track

Total elapsed time of the disc

Time remaining for the disc

13

Page 13
Image 13
Teac SZ-1 owner manual Repeat mode, Display dimming, Changing the display mode, Track repeat, Disc repeat