Before Use
What’s in the box
Please confirm that the following accessories are in the box when you open it.
Remote control unit x 1
Batteries (AA, R6,
Screwdriver x 1
Felt sheet x 4
Power cord x 1
Owner’s manual x 1
Warranty card x 1
Conventions about this manual
<Instructions in this manual describe the controls on the remote control. You can also use the buttons on the front panel if they have the same or similar names as those on the remote.
<The types of functions and operations that can be used for a particular disc vary depending on the features of that disc. In some cases, these functions and operations may differ from the descriptions given in this Owner’s Manual.
<The drawings about the front panel display used in this Owner’s Manual are purely for the purposes of explanation. The actual displays may differ slightly from what are shown here.
Read this before operation
<Be careful to avoid injury when moving the unit, on account of its weight. Get someone to help you if necessary.
<To protect easily scratched furniture, you may stick the felt supplied with the unit to the feet.
<As the unit may become warm during operation, always leave sufficient space around the unit for ventilation.
<The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.
<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.
<Do not place the unit on the amplifier/receiver.
<Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.
<To keep the laser pickup clean, do not touch it, and always close the disc tray.
<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.
<Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc or the unit.
WHEN MOVING THIS UNIT
When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc tray to its closed position in the player. Then, press the power switch to turn the power off, and disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit.
CAUTION
Ensure this product is not exposed to dripping or splashing and that no object filled with liquids, such as vases, is placed on the product.
Do not install this equipment in a confined space such as a book case or similar unit. Allow adequate air circulation around this product.
For European customers
Disposal of your old appliance
1.When this
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
“Super Audio CD” is a registered trademark. “DSD” is a registered trademark.
The i.LINK logo is a trademark of Sony Corporation, registered in the U.S. and other countries.
4