Technicolor - Thomson 15 manual Connect peripheral equipment, Personal computer

Personal computer

Monitor Display modes

DC 12V	ANT IN	Y	Pb	Pr	S-VIDEO VIDEO (MONO) L AUDIO R
	x 75	COMPONENT INPUT (480i)			IN	AV

&Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC INPUT at the back of the TV. Fix the connectors firmly with the screws on the plug.

Note: the VGA cable is not supplied with the TV.

ŽIn case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer and to the AUDIO L and R connectors of the AV input of the TV.

ÒPress the EXT button on the remote control or select Input in the setup menu (See p. 6) to select PC.

ÔSwitch on the computer.The TV can be operated as the computer monitor.

Note: If you have an Apple Macintosh computer, connect the VGA desktop block from the 3 row 15 pin to 2 row 15 pin with the signal cable and connect the VGA desktop block to the Apple Macintosh computer.

MODE Resolution		Horizontal	Vertical
		Frequency (KHz)	Frequency (Hz)
VGA	640x480	31,5 KHz	60Hz
	640x480	35,0 KHz	67Hz
	640x480	37,9 KHz	72Hz
	640x480	37,5 KHz	75Hz
	640x480	43,3 KHz	85Hz
(DOS) 720x400		31,5 KHz	70Hz
SVGA	800x600	35,2 KHz	56Hz
	800x600	37,9 KHz	60Hz
	800x600	48,1 KHz	72Hz
	800x600	46,9 KHz	75Hz
	800x600	53,7 KHz	85Hz
(MAC)	832x624	49,7KHz	75Hz
XGA	1024x768	48,4KHz	60Hz
	1024x768	56,5KHz	70Hz
	1024x768	60,0KHz	75Hz
	1024x768	68,7KHz	85Hz

Note:

-If the set is cold, there may be a small "flicker" when the set is switched on. This is normal, there is nothing wrong with the set.

-If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. The TV has been pre-adjusted to the mode VESA 1,024x768@60Hz.

-Some dot defects may appear on the screen, like red, green or blue spots. However, this will have no impact or effect on the monitor performance.

-Do not press the LCD screen with your finger for a long time as this may incur some afterimages.

Connect peripheral equipment 15