Use of the remote control
BStandby
Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged.
EXT Source
Select your computer or other peripherals: press repeatedly to select TV, VIDEO,
•VIDEO for a VCR connected to the AV connectors of the TV.
•
•COMPONENT for a DVD/DTV Set Top box or another component video device connected to Y, Pb,
Pr (480i) and to the AV AUDIO inputs L and R.•PC for a personal computer connected to the PC INPUT
connector of the TV.
Note: When a VCR is connected via the aerial socket, the TV is used in TV mode. Alternatively, you can select the tv, video,
0/9 Digit buttons
To select a TV channel.
0Previous program To display the previously selected TV channel.
MENU Press repeatedly to display each menu.
OK Press this key to activate your choice, when in the menus.
B
EXT | SLEEP |
1 2 3
4 5 6
7 8 9
0 0 CC
MENU 
OK
V 
 
CH
SLEEP Sleeptimer
With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from ..., 10, 20, 30... to 240 minutes.The timer begins to count down from the number of minutes selected after the display has disappeared.
Note:To view the remaining time, press the SLEEP button once. To cancel the sleep time, repeatedly press the SLEEP button until ...
appears.
If you turn the TV off after setting the sleep time, the setting will be erased. Set it again.
CCClosed Caption Press this button to turn Closed Caption on.
Be sure you have selected Caption On in the Setup menu. See p. 9.
VVolume
Press + or - to adjust the volume.
ÂMute
Temporarily interrupt the sound or restore it.
The captions automatically appear if the watched TV program provides CC info and
CH Channel selection
To browse through the TV channels which are not erased. To view a blocked channel, use the digit buttons to access the channel and enter your access code.
