Technicolor - Thomson 15 manual Preparation, Place the TV on a solid surface

Preparation

Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter!

& Place the TV on a solid surface.

ÔRemote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type R6-LR6 1.5V).

min. 1m

Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.

To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing.

ŽInsert the aerial plug firmly into the aerial socket ANT IN x 75 ¿ at the back

of the TV.

CABLE

ANT IN

x75

ÒTo connect your computer, see Connect peripheral equipment, Personal computer, p 15.To connect other peripherals,

see p. 12.

R6-LR6 / 1,5 V

(Power:This TV operates on a DC supply provided by the AC-DC adapter.The voltage is as indicated on the label on the back cover.

DC 12V

_ +

Only use the AC-DC adapter supplied with the TV and never apply an AC power cord to the TV directly.The AC-DC adapter operates on an AC power supply, the voltage is as indicated on the label of the AC-DC adapter.

Connect the DC plug of the AC-DC adapter to the DC 12V socket at the back of the TV. Connect the AC-DC adapter and its power cord.

Insert the power cord in the wall socket having a AC power supply of 110V.

¤Turn the TV on: Press the power button at the front side of the TV to turn it on or off.

If the TV is in standby mode, the standby

indicator in front of the TV illuminates brightly. Press the B button on the remote control or the – CH + button or one of the digit buttons to turn the TV on.

See p. 7 to memorize the channels available in your local broadcast area.

4Preparation