EN
General Operation
Switching the TV set on and off
To switch the TV set on, set the main switch at the back to position “I”.The light on the front panel is red.Then press the TV button, the PR+/PR- buttons or one of the numeric buttons on the remote control.The light turns green and the TV set comes on.
Note: It takes a few seconds for the TV set to come on.
To put the TV set into standby mode, press the 
button on the remote control The light on the front panel turns red.
To switch the TV set off, set the main switch at the back to position “0”.
Note:The TV set automatically goes into standby mode after three minutes if it does not receive any signal. To switch it back on again, press the TV button, the PR+/PR- buttons or one of the numeric buttons on the remote control.
Volume
Inputs / PIP | |
Picture | |
Display | |
Sound | |
Set Up | |
Info |
Volume:
Balance:
Equalizer: | User | |
Option: | Stereo | |
Volume Line Out: |
| |
| ||
Max Startup Volume: |
| |
| ||
AVC: | On | |
User Equalizer: | ||
|
| |
|
Volume control:
-use the 
+/- buttons on the front of the TV set or press the relevant buttons on the remote control to increase or decrease the volume; or
-select Sound from the main menu, then Volume.You can also use this menu to adjust the
Sound mute: Press the 
button on the remote control.The sound is switched
off.The sound is switched on again, if you press the 
button or the 
+/- buttons on the remote control.
Displaying status information
In TV mode, press the yellow button (INFO) on the remote control to display the number and name of the channel you are watching, the type of sound, the zoom or format.
When you switch on the television or change channels, the number and name of the channel are displayed.
Note:You can disable this information from being displayed using the Display Source Info function from the Set Up menu (see page 13).
Accessing channels
Using the numeric buttons:
-for channels 1 to 9, press the corresponding button;
-for channels 10 to 99, press the 0 button to display
Using the PR+/PR- buttons: scroll through the channels. AV programmes are not included in the cycle unless you use the buttons on the front of the TV set.
Using the list of programmes: refer to page 11.
To access the channel or AV programme previously being watched, press the RETURN button
Accessing AV programmes
Press the AV.PC button to display the last selected
10
