USING AUTOSURF™
fter you set up a list of your favorite sig- | 12 |
|
Anal sources in the SURF list, you can |
| |
SURF |
| |
press the SURF button to see the list and | 12 | ADD? |
quickly tune to a favorite signal source. | ||
Place up to 10 signal sources in the SURF |
|
|
LIST. |
|
|
Using the Remote Control
12
SURF
12 | DELETE? |
1
2 Press the SURF button. The Surf list box appears. The number of the cur- rent signal source is shown with ADD? to the right. (If you have not added any channels to the list, “SURF LIST EMPTY” appears on screen.) Press the CURSOR RING RIGHT to add the signal source to the Surf list.
3 Press the NUMBER buttons, CH(annel) +/– buttons, or the AV button to select another signal source to add to the Surf list. Press the SURF button and then the CURSOR RING RIGHT to add the signal source to the list.
Repeat this step, filling the list with up to 10 favorite signal sources. NOTE: If you exceed 10 signal sources, the first signal source on the list will be deleted from the list.
4 To tune to a favorite signal source from the list, press the SURF but- ton. The Surf list box appears. Press the SURF button or the CURSOR RING DOWN or UP as many times as necessary to tune to the signal source.
5 To delete a signal source from the list, press the SURF button. The Surf list box appears. Press the SURF button or the CURSOR RING DOWN or UP as many times as necessary to select the signal source to be deleted. Then press the CURSOR RING RIGHT to delete the signal source.
SURF LIST EMPTY
1,3
1,3
| 2,4, |
1, 3 | 5 |
|
24
SURF
12
24ADD?
24
SURF
12 |
|
24 | DELETE? |
7
SURF
8 |
|
11 |
|
15 |
|
4 |
|
7 | DELETE? |
HELPFUL HINT
Five signal sources can be shown in the Surf list box at one time. Press the CURSOR RING UP or DOWN to show any other sig- nal sources that are in the list.
27
