6
Other connections
1
2
61 2 53 874
1. Analog Audio Out sockets to amplifier.
2. Composite Video Out sockets (CVBS): to AV
amplifier or TV(standard-quality picture).
3. SCART/PERITEL Outputs (1) (RGB): to AV
amplifier or TVwith button 8on RGB.
4. COMPONENT Output (Y, Pb, Pr): to TV or
devices equipped with equivalent inputs with
button 8on Y, Pb, Pr.
5. S-VIDEO Out sockets (Ushiden signals Y/C):
to AVamplifier or TV.
6-7.Digital Audio Out sockets to amplifier or TV.
8. VIDEO OUT SELECT at the rear of the player to
select the type of output signal: RGB for the TV
(Scart/Peritel) or Y, Pb, Prfor the COMPONENT
VIDEOOUT sockets.
Audio connections (sound)
Video connections (picture)

Connections

The table below lists the connectors and quality of your player’s output signals. Select one of the 4
connection setups shown for video connection and one of the 3 connection setups shown for audio
connection.
Sound quality Type of connectorused
The connection setup shown on page 5 provides a rapid connection of your player. This setup
gives standard-quality sound reproduction and an optimum-quality picture (RGB). You may
need to use other connection setups suited to the connectors available on your other devices or
to get maximum performance out of your player. Your player has other sockets for these
purposes.
*** • OPTICALOUT socket (7) (Toslink optical connector – digital signal)
*** • COAXIAL OUT socket (6) (RCA socket- digital signal)
** • AUDIO OUTL / R socket (1) (RCAsockets- analog signal)
Picture quality Type of connectorused
*** • TV socket (3) (SCART socket – RGB signals)
*** • 3 Components sockets Y, Pb, Pr (4) (RCA sockets - signals Y, Pb, Pr)
** • S-VIDEO OUTsocket (5) (Hosiden socket- Y/C signal)
* • VIDEO OUT sockets(2) (RCA sockets- CVBS signal)
If the connecting cables are not supplied with
your player, get good-quality cables, preferably
well-known brands.
Connection through the scart socket supplies
both video and audio signals. If you choose the
connection using a scart cable, you don’t need to
connect any other sockets. Make sure that button
8
at the back is positioned on RGB and that your
TVset supports that type of signal.

1. 1.

DTH220E_EN 22/03/02 11:08 Page 6