DTH220E_EN 22/03/02 11:08 Page 12
Display menu
Navigation keys
The Display menu provides you with settings to adapt the picture format and TV standard to that of your TV set. You can also adjust the brightness of the player’s display panel.
When the player menu is displayed (in stop mode):
1.select Display using the Navigation keys,
2.press OK to validate,
3.select a function using the Navigation keys,
4.adjust the setting using the Navigation keys.
PAL or NTSC television
If the picture on the DVD being played appear in black and white on your TV screen, the standard of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to NTSC (1) or vice versa.
•Select PAL/NTSC then tick PAL or NTSC.
1.PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Display panel
Depending on the brightness of the room where you’ve installed your player, select one of the 4 settings to adapt the brightness of the display panel to suit its environment.
•Select Front Display then tick one of the settings: Dim for Movies, Off for Movies, Always Bright, Always Dim.
Picture format
Depending on the format of the DVD being played, use the TV image function to choose the format of the picture which best suits the format of your TV screen (2) - letterbox format 16 x 9, or standard format 4 x 3.
•With a letterbox format TV (16x9), select 16 x 9 wide screen. Films in 16x9 will be fully displayed. Films in 4x3 will have vertical black bands on each side of the picture.
•With a 4x3 television, select 4 x 3 Letterbox to take advantage of the pictures recorded in that format (3) or 16x9. Select 4 x 3 Standard to take advantage of a 4x3 picture without distortion. For films in 16x9, the edges of the picture may extend beyond the edges of the screen.
2.On certain DVDs, the picture format cannot be 3. Horizontal black bands at the top and bottom of
changed. | the screen. |
12
