2_DTH8540-50_en.qxd 11/08/05 11:40 Page 65

Menus

Standby mode

Your DVD recorder has an Eco Standby to reduce its power consumption when on stand-by. Select Eco. Standby to enable this function.

Note: the Eco function does not allow the display of programming warning messages on the display panel. Only the record icon will flash.

AV link

Allows a television set to control your DVD recorder and download the

EN

same channels to the same numbers during installation of channels (page 6).

Note: this function is positioned by default on On.

 

AV2 Input

 

Choose the S-Video or Video signal, depending on the device connected to

 

the AV2 Scart socket (usually a satellite or cable receiver), select RGB,

Scart connector

S-Videoor CVBS. If you do not know the type of signal supplied by the

connected device, try each of the settings to obtain the best result.

 

Note: format of image signals:

RGB: English signal colour code (Red – Green – Blue). This is best quality.

S-VideoS-VHS (Y/C), signals with separate colour components and brightness. This is average quality.

CVBS: composite video signals. This is poor quality.

65

Page 65
Image 65
Technicolor - Thomson DTH 8540, DTH 8550 manual Standby mode, AV link, AV2 Input