2_DTH8540-50_en.qxd 11/08/05 11:40 Page 13

Connections and initial set up

Reinstalling channels (updating)

If new channels make their way into the audiovisual scene, you will have to update your DVD recorder’s list of channels. In such a case, start a new channel search from the installation menu. This set-up deletes all stored channels and resets all the channels that your DVD recorder can receive. If you only want to set-up a single channel, refer to the manual search on page 12.

1. If the main menu is not displayed, press the MENU key on the remote control.

2. Select the Setup line using the or keys, and press OK to validate.

EN

3.Select the Installation line using the or keys, and press OK to validate.

4.Select the Channel search line using the or keys, and press OK to validate.

An installation window will appear. A cursor shows the progress in the set-up of the channels.When all the channels that you can receive in your area have been stored, 100 % is indicated. Press OK to return to the Channel search line. Press MENU to return to the Main Menu.

Sorting channels

1.If the Main Menu is not displayed, press the MENU key.

2.Select the Setup line using the or keys, and press OK to validate.

3.Select the Installation line using the or keys, and press OK to validate.

4.Select the Channel List line using the or keys, and press OK to validate. Refer to the Channel Sorting paragraph to check or sort out the channels stored on your DVD recorder.

13

Page 13
Image 13
Technicolor - Thomson DTH 8540, DTH 8550 manual Reinstalling channels updating, Sorting channels