Connecting to Computer
EN Charging the Battery
The player’s battery can only be charged through the USB port of a computer.
1.Open the cover of the USB jack and connect the smaller end of the USB extension cable to the USB jack on the player.
2.Insert the larger end of the USB extension cable into the USB port on the computer tightly. Once connected, the display shows as below:
3.Press and hold 
to enter battery charging mode. The display shows as below with the battery icon animating.
•Charge the unit for at least 2 hours before first use.
•You can still transfer files to the player in the battery charging mode.
•When the battery is full, the display shows “Battery full”.
Note: The player will
automatically go to battery 
charging mode if the battery
level is low.
Attention: Do not separately recharge, disassemble, incinerate, or expose to high temperatures over 45ºC (113ºF). Examples of high temperatures that may damage your product include leaving it in a locked car in the summer, the dashboard of car or putting it on top of other heat generating electronics devices (such as power amplifiers and computer monitors.
Transferring Files to the Player
You should refer to the software manual for details in software installation, connecting your player with the computer and transferring files to the player.
Attention: Do not disconnect
the USB connection during music download. Doing so may
corrupt system files or the files being downloaded.
5
