Technicolor - Thomson ITC008 manual Daily use

ITC008_en 3/03/03 16:33 Page 6

Daily use

How to switch on the set?

With the On/Off-button fitted on the set. When the red LED is lit, the TV set has previously been switched on standby with the key B on the remote control.

If the red LED flashes, it means that the control keyboard of the TV is locked and can only be made operational again through the remote control.

In both cases, enter a channel number.

How to select a channel?

Through the digital keys of the remote control.

For two figure channels (10, 11, 12, etc.) press the 0 key on the remote control unite twice.

“--” appears on the screen. Through the digital keys, enter the tens unit digit, then the unit one (you can also quickly enter the two digits).

With the PR+ or PR- button of the remote control or the keypad.

If you change the channel with the PR+ or PR- buttons of the keypad, maintain the button pressed until the next or preceding channel appears on the screen.

How to adjust the volume?

-With the remote control, by making short pulses or maintaining the VOL+/- buttons pressed.

-With the keypad of the television, by maintaining buttons VOL+/- pressed.

How to mute the sound?

With the ( ) key.

Press once more on the key to reactivate the sound.

Operating the zoom:

Using the Left/Right directional keys, select:

-4/3 format,

-14/9 zoom (14/9 letterbox format),

-16/9 zoom (16/9 letterbox format),

-16/9 zoom subtitles (16/9 letterbox format – subtitles),

-Cinerama zoom (optional),

-16/9 format.

Zoom functions are only available on 16/9 TV sets.

How to display the channel number?

With the INFO key, display or remove the channel number and, if you want it, the time left before timer- programmed switch-off.

How to recall the preferred settings?

Press on the red key to recall the sound and picture settings you previously stored (see page 5).

How to programme a switch-off?

Press on the Green (ZZZ/LIST), key, then using the Left/Right keys, adjust on the screen the wished-for duration before the switching-off of the TV set (by intervals of 5 minutes up to 4 hours).

To exit the menu, press EXIT.

When the programmed remaining time is over, the TV set will switch on standby.

To cancel, first press the Green (ZZZ/LIST) and then, by means of the directional key Left, reset the time remaining on 00:00.

The programmed switching-off is also deactivated when the TV set is turned off through its own On/Off switch.

How to prevent kids using the TV set?

Hold key Bon the remote control down for over 5 seconds until the red LED on the TV set flashes.

The keys of the TV set are now locked and switching it on again will be possible by means of the remote control only.

Keep the remote control out of the reach of children. To unlock the keys of the TV set, make use of the number keys on the remote control.

The keys of the TV set will also remain locked after timer-programmed switching-off.

The lock function will also be activated when the TV set is switched on standby or switched off with its On/Off switch before the time remaining until programmed switching-off is over.

How to switch off the set?

To switch the TV set off, press the key B on the remote control or use the On/Off switch on the TV set. The TV set automatically switches to stand-by after a few minutes without telecast on the selected channel.

Important:

The display SIGNAL = 0 on the grey screen means that you are on an AV programme and that the TV set is not receiving any signal.

6