![Settings](/images/new-backgrounds/10050/1005021x1.webp)
MS6000 EN 4/2/03 3:14 PM Page 11
Settings
Showing the Demonstration | Setting the Timer | EN |
Magic demonstration is available in all modes except for when timer is on or sleep mode is
activated. Press DIMMER/DEMO to turn on/off magic demonstration mode. The demonstration scrolls through all display operations.
1.Press and hold TIMER until ON 0:00 appears with the hour flashing (ON - timer on time). ALARM SET will show on the second row of the display to indicate you are currently in timer setting mode.
Setting Clock / Timer
Setting the Clock
1.Press and hold CLOCK/RDS until the hour flashes on the display. CLOCK SET will show on the second row of the display to indicate you are currently in clock setting mode.
0:00
CLOCK SET
2. Press DIGITAL TUNING |
| or |
| on the | ||
|
| |||||
main unit or PRESET / PREV |
| or | ||||
| ||||||
| ||||||
PRESET / NEXT |
| on the remote control to | ||||
| ||||||
| ||||||
select the hour. |
|
|
|
|
|
|
3.Press CLOCK/RDS to shift to minute digits.
4.Follow step 2 to set the minute digits.
5.Press PROG.•SET to confirm and save settings. Press STOP to quit setting.
Note: When system is ON, you can press CLOCK/RDS to display the current time (CURR TIME) for about 2 seconds.
ON 0:00
ALARM SET
2. Press DIGITAL TUNING | or | on the | |||
main unit or PRESET / PREV |
|
| or PRESET / | ||
|
| ||||
|
| ||||
NEXT |
| on the remote control to select the | |||
| |||||
| |||||
hour. |
|
|
|
|
|
3.Press TIMER to shift to minute digits.
4.Repeat step 2 to select minute digits.
5.Press TIMER to shift to timer off time setting.
6.OF 0:00 (timer off time) will show on
the display with hour flashing. Repeat steps 2 - 4 for timer off time setting.
7.Press TIMER to select source.
8.Press DIGITAL TUNING or
on the main
unit or PRESET / PREV or PRESET / NEXT
on the remote control to select between CD MODE /TUNER / TAPE/ REC TU.
8.Press TIMER to set volume.
9.Rotate the VOLUME CONTROL knob on the main unit or press VOL + or VOL - on the remote control to set desired volume level.
10.Press PROG.•SET to confirm and save settings. Press STOP to quit setting.
Activating the Timer
Press and release TIMER to activate and deactivate
the timer. | will lit when the alarm is active. |
6