Technicolor - Thomson MS6000 Selecting Tuner, Tuning to a Station, Using Presets, Remote Only

MS6000 EN 4/2/03 3:14 PM Page 19

Tuner

Selecting Tuner

1.Press SOURCE to select TUNER.

2.Press BAND to select between FM/MW/LW radio band.

Tip: Your audio system has 32 preset stations.

Tuning to a Station

Press DIGITAL TUNING		or	on the main
unit or TUNE REW	/TUNE F FWD		on the
remote control to select frequencies.

Using Presets

The tuner can be either TUNE or PRESET mode.

When in PRESET mode, the PROG light is on.

•Press TUNE/PRESET on the main unit to toggle TUNE and PRESET mode.

• Press DIGITAL TUNING	or	on the main
system or PRESET PREV	or PRESET NEXT

on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (FMPR:01 is FM preset 1)

Auto Preset Programming (for FM only)

Press and hold BAND/AUTO PROG./DECK1•2 button for 2 second to scan stations in the selected band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button.

You can stop the automatic scan by pressing any but- ton, but the erased stations cannot be recovered.

6. Press PROG•SET to store the selected frequency at EN that preset.

Suppressing Stereo Signal

Press CD INFO/ FM ST on the remote control to toggle between FM mono and stereo for stereo FM stations.

Tuning to an RDS Station

Tip: RDS stations broadcast on FM only. When the tuner detects an RDS signal, the RDS icons turns on.

1. Press TUNE•PRESET to access preset station or

press DIGITAL TUNING or to desired frequency.

2.If RDS station found, RDS lights on display with station name shown.

Displaying RDS Station Information

Press CLOCK/RDS on the main unit or REPEAT/RDS on the remote control to display the frequency, sta- tion name (PS), station type (PTY), clock time (CT), or radio text (RT). In CT mode, press INTRO/CT key to replace the displayed time by RDS station time. If clock time is not yet set, this information will be shown as clock time automatically.

Searching by Program Type (PTY)

(Remote Only)

1.Press /PTY to enter PTY selection

2.Toggle /PTY to select a PTY mode.

3. Within 5 seconds, press DIGITAL TUNING	or
to search for a station broadcasting the
selected type of program.

Manually Setting Presets

1.	Press TUNE•PRESET to enter TUNE mode.
2.	Press DIGITAL TUNING	or	to access
	the desired frequency.

3.Press the PROG•SET button once.

4.The most recently accessed program location will be displayed.

5.If a different program location is preferred, press

DIGITAL TUNING	or	to move to the
desired preset number (1-32).

You can search for stations using one of the following program types:

RDS NEWS (news), AFFAIR ( news and documentaries), INFO (weather, medical), SPORT (sports),

EDUCAT (education), DRAMA (series and plays), CULTUR (religion), SCIENC (science and technology), VARIED (miscellaneous), POP M (pop music), ROCK M (rock music), MOR M (middle-of-the road music), LIGHTM (light music), CLASSI (classical music), OTHERM (unclassified music), ALARM (alarm).

14