Before You Begin
Before You Begin
EN Inserting battery into the player
1.Remove the battery door by applying thumb pressure, then lift the battery door out and off the cabinet.
Using Headphones
Insert phone plug into the headphones
jack ( | ) on the back of player for |
listening. |
|
Have a Blast- Just Not in Your Eardrums. Make sure you turn down the volume on the unit before you put on headphones. Increase the volume to the desired level only after headphones are in place.
Connecting the Lyra Player to your Computer
1.Lift the cover that is covering the USB connector on the player.
2.Insert the USB connector of the player into the USB port on the computer tightly.
EN
Note
Refer to the Software Instruction manual for procedures in setting up USB drivers and transferring files to the player.
2.Insert a “AAA/LR03/R03” battery with polarities corresponding to the indications on the compartment. (Refer to “Before You Begin” for important battery information.)
3.Close the door of the battery compartment.
Note
Refer to the power level indicator on display for battery level.
Replace with new battery when the indicator is empty.
How to Use Your Clip
Budphones
The right ear clip phone is labeled R while the left ear clip phone is labeled L.
1.Slide the ear hook behind the ear with the ear pad on the front of the ear.
2.For best sound quality, make sure the earpad fits closely with your ear.
Note
Remember to replace the cover after use in correct direction so that it matches well to the shape of the unit.
5 |
|
|
| 6 |
