MEMO:
When the backup recording is started, the “TRIGGER TO DV” indication is shown on the LCD or in the viewfinder for 3 seconds.
When the Backup Recording function of BR-DV600A or BR-DV3000 is used, the DV REC TRIGGER item on the GY-DV5100’s OTHERS (1/2) Menu Screen should be set to OFF.
If the backup device is equipped with a feature to record time codes input from the DV IN/OUT terminal (TC DUPLICATE feature), time code data the same as on the master side can be recorded.
When using BR-DV600A as a backup device and switching GY-DV5100 from the EDIT SEARCH or PLAYBACK mode to the RECORD mode, noise will be noticed on the monitor output screen of BR-DV600A (backup will be correctly recorded).
Operation
Start and stop of recording on the backup unit takes place in accordance with the operation of the VTR trigger button on the master unit.
Start and stop of recording on the backup unit takes place in accordance with start and stop of recording on the master unit. (Depending on the GY-DV5100 or the backup unit, the image, audio, and/or time code may deviate from what they should be at the points where the recording is started or stopped.)
8. When dubbing is completed.
Press the VTR trigger or the STOP button on the GY-DV5100 to stop recording, and then stop playback on the playback unit.
MEMO:
Depending on the player, sound may not be heard momentarily from this unit when switching modes from STILL to PLAY.
7. Press the VTR trigger on the GY-DV5100 to start recording. To temporarily pause the recording, press the VTR trigger. To restart the recording, press the VTR trigger again.
Date and time
Backup Recording of the GY-DV5100's Camera Image and Sound Through the DV Connector
The GY-DV5100’s camera image and sound can be recorded for backup on another component that is equipped with DV connector. Recording operation is performed on the backup equipment simultaneously with performance of the recording operations on the GY-DV5100.
The data generated by the GY-DV5100’s time code generator is recorded.
REC
01/02/03 01:23:45
TC00:00:00:00
Time code
4. Insert the videocassettes.
GY-DV5100: Insert the videocassette to be dubbed to.
Playback unit: Insert the recorded videocassette.
5. Connect the units with the DV cable.
6. Start playback on the playback unit.
For details, see the instructions to the unit used for playback. The playback picture from the playback unit appears on the GY-DV5100’s LCD monitor and viewfinder screen.
1. Switch the DV/INT selector switch on the rear of the camera to DV.
2. Turn ON both units.
3. Place the GY-DV5100 in the VTR MODE.
Press the MODE switch upward to turn on the VTR indicator.
9. USING EXTERNAL COMPONENTS
9-1 Connecting a Video Component with DV Connector (Cont’d)
When Using the GY-DV5100 as RECORDING Unit (Dubbing From Another Videocassette)
Backup unit
DV INT
VTR
CAM
MODE

U

E

9. USING EXTERNAL COMPONENTS

9-1 Connecting a Video Component with DV Connector (Cont’d)

When Using the GY-DV5101 as RECORDING Unit (Dubbing From Another Videocassette)

MODE switch

Date and time data:

Data transmitted from the playback unit is recorded.

Time code:

MODE

 

 

VTR

 

 

CAM

MODE switch

DV

INT

Date and time data:

 

 

Data transmitted from the playback

 

 

unit is recorded.

 

 

Time code:

 

 

The data generated by the GY-

 

 

DV5101’s time code generator is

Time code

 

recorded.

 

 

 

 

00:00:00:00

REC

01/02/03 01:23:45

Date and time

1. Switch the DV/INT selector switch on the rear of the camera to DV.

2. Turn ON both units.

3. Place the GY-DV5101 in the VTR MODE.

Press the MODE switch upward to turn on the VTR indicator.

4. Insert the videocassettes.

GY-DV5101: Insert the videocassette to be dubbed to.

Playback unit: Insert the recorded videocassette.

5. Connect the units with the DV cable.

6. Start playback on the playback unit.

For details, see the instructions to the unit used for playback.

The playback picture from the playback unit appears on the GY-DV5101’s LCD monitor and viewfinder screen.

7.Press the VTR trigger on the GY-DV5101 to start recording. To temporarily pause the recording, press the VTR trigger. To restart the recording, press the VTR trigger again.

8.When dubbing is completed.

Press the VTR trigger or the STOP button on the GY-DV5101 to stop recording, and then stop playback on the playback unit.

MEMO:

Depending on the player, sound may not be heard momentarily from this unit when switching modes from STILL to PLAY.

Backup Recording of the GY-DV5100’s Camera Image and Sound Through the DV Connector

The GY-DV5100’s camera image and sound can be recorded for backup on another component that is equipped with DV connector. Recording operation is performed on the backup equipment simultaneously with performance of the recording operations on the GY-DV5100.

Master unit

DV cable

Signal flow

Connections

Use the GY-DV5100 as the master unit.

Connect the master unit and the backup unit with a DV cable

Settings

Master unit (GY-DV5100)

Place in CAMERA mode.

Set the DV REC TRIGGER item on the OTHERS (1/2) Menu Screen to ON.

Backup unit

Place in DV signal input mode.

* Depending on the used component, it may be necessary to set “REMOTE SELECT”.

When BR-DV600A or BR-DV3000 is used, set the Backup Recording function to OFF.

Insert the tape and set to STOP or REC PAUSE status.

Master unit

Backup unit

DV cable

Signal flow

Connections

Use the GY-DV5100 as the master unit.

Connect the master unit and the backup unit with a DV cable

Settings

Master unit (GY-DV5100)

Place in CAMERA mode.

Set the DV REC TRIGGER item on the OTHERS (1/2) Menu Screen to ON.

Backup unit

Place in DV signal input mode.

* Depending on the used component, it may be necessary to set “REMOTE SELECT”.

When BR-DV600A or BR-DV3000 is used, set the Backup Recording function to OFF.

Insert the tape and set to STOP or REC PAUSE status.

Operation

Start and stop of recording on the backup unit takes place in accordance with the operation of the VTR trigger button on the master unit.

Start and stop of recording on the backup unit takes place in accordance with start and stop of recording on the master unit. (Depending on the GY-DV5100/5101 or the backup unit, the image, audio, and/or time code may deviate from what they should be at the points where the recording is started or stopped.)

MEMO:

When the backup recording is started, the “TRIGGER TO DV” indication is shown on the LCD or in the viewfinder for 3 seconds.

When the Backup Recording function of BR-DV600A or BR-DV3000 is used, the DV REC TRIGGER item on the GY-DV5100’s OTHERS (1/2) Menu Screen should be set to OFF.

If the backup device is equipped with a feature to record time codes input from the DV IN/OUT terminal (TC DUPLICATE feature), time code data the same as on the master side can be recorded.

When using BR-DV600A as a backup device and switching GY-DV5100 from the EDIT SEARCH or PLAYBACK mode to the RECORD mode, noise will be noticed on the monitor output screen of BR-DV600A (backup will be correctly recorded).

66

E-66

Page 51
Image 51
JVC GY-DV5100 instruction manual Connecting a Video Component with DV Connector Cont’d, Connections, Settings, Operation