JVC GY-DV5100 instruction manual Header REC Menu Screen, TIME/DATE Menu Screen

11. MENU SCREENS

11-12 HEADER REC Menu Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 58)

Item		Function	Variation Range	Initial Setting
START KEY	Sets whether the HEADER REC operation should be executed when		STOP+VTR	DISABLE
	the VTR trigger button is pressed while the STOP button is pressed.		DISABLE
	STOP+VTR : HEADER REC operation is executed.
	DISABLE	: HEADER REC operation is not executed.
TC DATA	Sets the time code value for the point when the Record-Standby mode		EXECUTE	EXECUTE
	is engaged following completion of HEADER REC.		ZERO
	EXECUTE	: Confirms the set time code.	PRESET
	ZERO PRESET : Resets all time codes to zero (0).		CANCEL
	CANCEL	: Clears the set time code.
	The Frame mode will in accordance with the setting of the DROP/NON
	DROP item on the TC/UB/CLOCK menu screen.
	* The time code value at the point when the Record-Standby mode is
	engaged may differ some frames from the value set for this item.
UB DATA	Sets the user’s bits of the HEADER REC section.		EXECUTE	EXECUTE
	EXECUTE	: Confirms the set user’s bits.	ZERO
	ZERO PRESET : Resets all user’s bits data to zero (0).		PRESET
			CANCEL
	CANCEL	: Clears the set user’s bits.

		MEMO:
	The user’s bits for the normal recording section are set on the TC/
	UB/CLOCK menu screen.
BARS TIME	Sets the duration (seconds) in which the color bar signal and test tone		0 SEC	30 SEC
	(1 kHz) is recorded during HEADER REC. (1-sec steps)		to
			99 SEC
BLACK TIME	Sets the duration (seconds) in which the black signal is recorded during		0 SEC	30 SEC
	HEADER REC. (1-sec steps)		to
			99 SEC
PAGE BACK	The TC/UB/CLOCK menu screen returns when the SHUTTER dial is		–––––	–––––
	pressed.

11. MENU SCREENS

11-13 TIME/DATE Menu Screen

Item		Function	Variation Range	Initial Setting
DISPLAY	Sets whether the date and time are shown in the status display on the		OFF	OFF
	LCD monitor or in the viewfinder.		ON
	OFF: Not displayed.
	ON : Displayed.
	● When a tape with time and date not recorded is played back, there will
	be no display of time and date even when this item is set to ON.
	● To display the date and time recorded on the tape, set the DATE REC
	item to OFF. When the DATE REC item is set to BARS or BARS+CAM,
	the date and time recorded on the tape are not displayed even if this
	item is set to ON.
DISPLAY	In the Camera mode, the date and time are displayed in accordance with		BARS+CAM	BARS+CAM
MODE	the following settings. In the VTR mode, if the DATE REC item is set to		BARS
	OFF, the date and time recorded on a tape are displayed in accordance		CAM
	with the following settings.
	BARS+CAM : Date and time are always displayed.
	BARS	: Date and time are displayed when the OUTPUT switch on
		the side section is set to BARS.
	CAM	: Date and time are displayed when the OUTPUT switch on
		the side section is set to CAM.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
DATE REC	Selects whether date and time are to be recorded on the tape as video		OFF	OFF
	data or not, as well as the video mode in case of recording.		BARS
	Recording is done according to the set position of the OUTPUT switch at		BARS+CAM
	the side panel.
	OFF	: Date and time data are not recorded.
	BARS : Date and time data are recorded when color bars are output.
	BARS+CAM: Date and time data are recorded when color bars and camera
	image are output.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
	With setting to BARS or BARS+CAM, the screen size is fixed to 4:3.
DISPLAY	Selects the style for the date and time display.		DATE+TIME	DATE+TIME
STYLE	DATE+TIME: Date and time are displayed.		DATE
	DATE: Date only is displayed.		TIME
	TIME : Time only is displayed.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
DATE STYLE	Selects the style for the date display.		YY/MM/DD	MM/DD/YY
	YY/MM/DD: Displayed in the format of year/month/date.		MM/DD/YY
	MM/DD/YY: Displayed in the format of month/date/year.		DD/MM/YY
	DD/MM/YY: Displayed in the format of date/month/year.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
TIME STYLE	Selects the style for the time display.		24 HOUR	24 HOUR
	24 HOUR: Displays the time using the 24-hour system.		12 HOUR
	12 HOUR: Displays the time using the 12-hour system.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
SEC DISPLAY	Selects whether to display the seconds in the time display.		OFF	ON
	OFF: Seconds are not displayed.		ON
	ON : Seconds are displayed.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item
	cannot be selected.
CLOCK	To adjust the date and time, align the cursor with this position and then		–––––	–––––
ADJUST	press the SHUTTER dial.
	The date and time are set on the CLOCK ADJUST screen. For the setting
	method, see “Setting, Displaying and Recording the Date and Time” on
	page 43.
PAGE BACK	The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed		–––––	–––––
	while the cursor is at this position.

84 85