U

10. TIME CODE OPERATION

TIME CODE PRESETTING PROCEDURE

E

10. TIME CODE OPERATION

TIME CODE PRESETTING PROCEDURE

POWER VTR

SHUTTER dial STATUS button

TOP MENU screen

––– MENU –––

CAMERA OPERATION.. CAMERA PROCESS.. AUDIO/VIDEO.. LCD/VF..

TC/UB/CLOCK.. OTHERS..

FILE MANAGE..

MENU ALL RESET CANCEL EXIT

TC/UB/CLOCK menu screen

––– TC/UB/CLOCK –––

TC PRESET

00:00:00:00

 

EXECUTE

UB PRESET

00 00 00 00

 

EXECUTE

DROP/NON DROP DROP

HEADER REC..

TIME/DATE..

PAGE BACK

The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen.

1.Display the TC/UB/CLOCK menu screen.

1 Press the Status button for 1 second or more to display

the TOP MENU screen.

2 Rotate the SHUTTER dial to align the cursor () with the TC/UB/CLOCK item, and then press the SHUTTER dial.

The TC/UB/CLOCK menu screen appears.

2.Set the time code (hours, minutes, seconds, frames).

1 Rotate the SHUTTER dial to align the cursor () with TC PRESET, and then press the SHUTTER dial.

The first digit of the time code blinks. The blinking digit is the one to be set.

2 When the SHUTTER dial is pressed, the blinking digit changes.

3 When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

4 Repeat the procedure described in 2 and 3 above to set the desired value for all digits.

5 After setting the frame digit, press the SHUTTER dial to make EXECUTE blink. The setting values are confirmed when the SHUTTER dial is pressed again.

To cancel the setting, select CANCEL and press the SHUTTER dial.

3.When all the digits are set.

Press the STATUS button to return to the normal screen or

Rotate the SHUTTER dial to align the cursor () with the PAGE BACK item, and then press the SHUTTER dial to return to the TOP MENU screen.

SHUTTER dial STATUS button

TOP MENU screen

––– MENU –––

CAMERA OPERATION.. CAMERA PROCESS.. AUDIO..

LCD/VF..

TC/UB/CLOCK.. OTHERS..

FILE MANAGE..

MENU ALL RESET CANCEL EXIT

TC/UB/CLOCK menu screen

––– TC/UB/CLOCK –––

TC PRESET 00:00:00:00

EXECUTE

UB PRESET

00

00 00 00

 

EXECUTE

UB REC

ON

 

HEADER REC..

 

 

TIME/DATE..

PAGE BACK

The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen.

1.Display the TC/UB/CLOCK menu screen.

1 Press the Status button for 1 second or more to display

the TOP MENU screen.

2 Rotate the SHUTTER dial to align the cursor () with the TC/UB/CLOCK item, and then press the SHUTTER dial.

The TC/UB/CLOCK menu screen appears.

2.Set the time code (hours, minutes, seconds, frames).

1 Rotate the SHUTTER dial to align the cursor () with TC PRESET, and then press the SHUTTER dial.

The first digit of the time code blinks. The blinking digit is the one to be set.

2 When the SHUTTER dial is pressed, the blinking digit changes.

3 When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

4 Repeat the procedure described in 2 and 3 above to set the desired value for all digits.

5 After setting the frame digit, press the SHUTTER dial to make EXECUTE blink. The setting values are confirmed when the SHUTTER dial is pressed again.

To cancel the setting, select CANCEL and press the SHUTTER dial.

3.When all the digits are set.

Press the STATUS button to return to the normal screen or

Rotate the SHUTTER dial to align the cursor () with the PAGE BACK item, and then press the SHUTTER dial to return to the TOP MENU screen.

Time code (hour, min, sec, frame)

Time code (hour, min, sec, frame)

PRESETTING USER’S BIT DATA

––– TC/UB/CLOCK –––

TC PRESET

00:00:00:00

 

EXECUTE

UB PRESET

00 00 00 00

 

EXECUTE

DROP/NON DROP DROP

HEADER REC..

TIME/DATE..

PAGE BACK

Align the cursor with UB

The user’s bit data are preset with the UB PRESET item on the TC/UB/CLOCK menu screen.

The method for setting is the same as the method for setting the time code described above.

The user’s bit can be specified using numerals or alphabetic letters from 0 to F for each digit.

CAUTION:

It is not possible to set all the digits of the user’s bit data to “F”. Reading of the data during playback will not be possible for an all-F setting.

PRESETTING USER’S BIT DATA

––– TC/UB/CLOCK –––

TC PRESET

00:00:00:00

 

EXECUTE

UB PRESET

00 00 00 00

 

EXECUTE

UB REC

ON

HEADER REC..

 

TIME/DATE..

 

PAGE BACK

 

Align the cursor with UB

The user’s bit data are preset with the UB PRESET item on the TC/UB/CLOCK menu screen.

The method for setting is the same as the method for setting the time code described above.

The user’s bit can be specified using numerals or alphabetic letters from 0 to F for each digit.

To record user’s bit data, set the UB REC item to ON.

CAUTION:

It is not possible to set all the digits of the user’s bit data to “F”. Reading of the data during playback will not be possible for an all-F setting.

Zero-resetting the Time Code or User’s Bit Data

This is performed with the TC or UB PRESET item on the TC/UB/CLOCK menu screen. (Performed separately for the time code and the user’s bit data.)

1 Rotate the SHUTTER dial to align the cursor () with the TC or UB PRESET item, and then press the SHUTTER dial.

2 Rotate the SHUTTER dial to select ZERO PRESET as the setting value, and then press the SHUTTER dial.

Zero-resetting the Time Code or User’s Bit Data

This is performed with the TC or UB PRESET item on the TC/UB/CLOCK menu screen. (Performed separately for the time code and the user’s bit data.)

1 Rotate the SHUTTER dial to align the cursor () with the TC or UB PRESET item, and then press the SHUTTER dial.

2 Rotate the SHUTTER dial to select ZERO PRESET as the setting value, and then press the SHUTTER dial.

69

E-69

Page 54
Image 54
JVC GY-DV5100 Zero-resetting the Time Code or User’s Bit Data, Shutter dial Status button TOP Menu screen