JVC GY-DV5100 instruction manual Camera Operation Menu Screen, Camera Process Menu Screen

11. MENU SCREENS

11-5 CAMERA OPERATION Menu Screen

The CAMERA OPERATION menu screen is only displayed in the Camera mode.

Item		Function	Variation Range	Initial Setting
SHUTTER	The SHUTTER button on the right side section is used to select STEP for		STEP	STEP
	fixed shutter speed or V.SCAN variable scanning rate for shooting computer		VARIABLE
	monitor screens.
	STEP	:Enables setting of different fixed shutter speeds. [1/7.5, 1/
		15, 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
		1/10000]
	VARIABLE :Selected when shooting computer monitor screens, etc.
		[Variable range: 60.1 to 2084.6 Hz]
FAW	Selects the W.BAL switch (% on page 14) position to which the FAW		NONE	NONE
	(Full-Time Auto White Balance Adjustment) function is to be assigned.		A
	NONE	:FAW function is not used.	B
	A	:FAW is assigned to the A position.	PRESET
	B	:FAW is assigned to the B position.
	PRESET :FAW is assigned to the PRESET position.
GAIN L	Selects the gain value in each position of the GAIN switch (# on page		–3dB	L: 0dB
GAIN M	14).		0dB	M: 9dB
GAIN H			3dB	H: 18dB
			6dB
			9dB
			12dB
			15dB
			18dB
			ALC
LOLUX GAIN	Sets the gain up value when in the LOLUX mode.		24dB	30dB
	(SS: Shutter speed 1/30)		24dB+SS
			30dB
			30dB+SS
			36dB
			36dB+SS
SMOOTH	Smoothens the transition when the GAIN switch (# on page 14), or		ON	OFF
TRANS	WHT.BAL switch (% on page 14) is switched over and achieves gradual		OFF
	change in place of sudden change.
	However, the smooth transition function does not function when switching
	the GAIN switch set in ALC, FAS button and the LOLUX button.
	ON :Activates the smooth transition function.
	OFF :Deactivates the smooth transition function.
SPOT L/	Sets the level of auto iris when setting the AUTO IRIS switch to BACK L or		LOW	MIDDLE
BACK L	SPOT L.		MIDDLE
	LOW	: Lowers the iris level.	HIGH
	MIDDLE : Opens/Closes the iris by 1 step from the standard state.
	HIGH	: Raises the iris level.
ASPECT	Sets the image size of the video signal.		4:3	4:3
RATIO	4:3	:4:3 aspect ratio image output.	LETTER
	LETTER	:LETTER BOX (16:9 aspect ratio) image output.	SQUEEZE
	SQUEEZE :SQUEEZE: Images in aspect ratio 16:9 are displayed in
		aspect ratio 4:3.
	● When setting DATE REC in the TIME/DATE menu screen to BARS or
	BARS+CAM, the screen size will be fixed at an aspect ratio of 4:3.
	● When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect
	ratio distinction ID signal is outputted from the Y/C OUT terminal.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the		–––––	–––––
	cursor at this position.
				75

11. MENU SCREENS

11-6 CAMERA PROCESS MENU Screen

The CAMERA PROCESS menu screen is only displayed in the Camera mode.

Item			Function	Variation Range	Initial Setting
MASTER	Adjusts the pedestal level (master black), which is the reference of black.			MAX (10)	NORMAL
BLACK	● To increase the pedestal level ..... Increase the number. (UP)			9
	● To decrease the pedestal level .... Decrease the number. (DOWN)			to
				NORMAL (0)
				to
				–9
				MIN (–10)
DETAIL	Adjusts the detail enhancement level.			MAX (10)	NORMAL
	● To sharpen details ....................... Increase the number. (UP)			9
	● To soften details .......................... Decrease the number. (DOWN)			to
				NORMAL (0)
		Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.			to
				–9
				MIN (–10)
DTL. V/H	Sets the direction, horizontal (H) or vertical (V), in which stronger detail			H-MAX (5)	NORMAL
BALANCE	enhancement is applied.			4
	To strengthen the H enhancement ...... Increase the number (UP).			to
	To strengthen the V enhancement ...... Decrease the number (DOWN).			NORMAL (0)
				to
		Note:
				–4
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
				H-MIN (–5)
DTL.	Varies the detail enhancement level by changing the detail			LOW	MIDDLE
FREQUENCY	enhancement frequency.			MIDDLE
	Set in accordance with the subject.			HIGH
		LOW ------ Lowers the frequency for contour highlight.
			Use this when shooting objects with large patterns.
		MIDDLE --- Sets the frequency for contour highlight to standard.
		HIGH ------ Increases the frequency for contour highlight.
			Use this when shooting objects with fine patterns.
		Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.

76