U
E
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
6-3 Viewfinder Adjustment
| 2. | 1. |
|
| |
Eyepiece |
|
|
2. Eyepiece | 1. | 1. |
focusing ring |
| |
|
| |
| 3. | 3. |
| CONT | BRIGHT |
1.Adjust the position and angle of the viewfinder.
2.Diopter adjustment
Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible.
3.Brightness and contrast adjustment
When the ambient brightness changes, etc., the brightness and contrast of the viewfinder screen can be adjusted with the BRIGHT and CONT controls.
MEMO:
The screen size of the viewfinder can be changed by selecting the desired size with the ASPECT RATIO item on the CAMERA OPERATION menu screen (4:3 or LETTER).
| 2. | 1. |
|
| |
Eyepiece |
|
|
2. Eyepiece | 1. | 1. |
focusing ring |
| |
|
| |
| 3. | 3. |
| CONT | BRIGHT |
1.Adjust the position and angle of the viewfinder.
2.Diopter adjustment
Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible.
3.Brightness and contrast adjustment
When the ambient brightness changes, etc., the brightness and contrast of the viewfinder screen can be adjusted with the BRIGHT and CONT controls.
MEMO:
The screen size of the viewfinder can be changed by selecting the desired size with the ASPECT RATIO item on the CAMERA OPERATION menu screen (4:3 or LETTER).
6-4 External Monitor Adjustment
Color video monitor
1.
LINE OUT
Y/C OUT MONITOR OUT
3.~8.
2.
POWER VTR
ONOFF
■SMPTE type color bars
White Yellow Cyan Green Magenta | Red | Blue |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|
|
| ||
Blue | Black Magenta Black | Cyan | Black | White | ||
8 | 9 | 0 | A | B | C | D |
Black | White |
| Black |
|
|
|
Display the camera
1.Connect a color video monitor to the MONITOR OUT connector of the
2.Set the COLOR BARS/CAMERA/AUTO KNEE switch to BARS to output the color bar signal (SMPTE type color bars).
3.Set the monitor’s BLUE CHECK function to ON while the color bars are being displayed so that the screen turns entirely blue and the color bars become blue stripes.
4.Adjust the CHROMA control of the monitor so that there is no difference in brightness between the color bars 1 and 8, 7 and D.
5.With the BLUE CHECK function ON, adjust the PHASE control of the monitor so that there is no difference in brightness between the color bars 3 and 0, 5 and B.
6.If the phase control adjustment above causes a difference in brightness between the color bars 1 and 8, 7 and D, start again from the CHROMA control adjustment in step 4.
7.Set the monitor’s BLUE CHECK function to OFF to switch the monitor back to the standard screen (R, G and B will all appear).
8.Use the monitor's brightness control to adjust so that the color bars H and I disappear but J is visible.
PUSH
Colour video monitor
1.
LINE OUT
Y/C OUT MONITOR OUT
3.~8.
2.
POWER VTR
ONOFF
■EBU type colour bars
White | Yellow | Cyan | Green | Magenta | Red | Blue | Black |
Display the camera
1.Connect a colour video monitor to the MONITOR OUT connector of the
2.Set the COLOR BARS/CAMERA/AUTO KNEE switch to BARS to output the colour bar signal (EBU type colour bars).
3.Set the monitor’s BLUE CHECK function to ON while the colour bars are being displayed so that the screen turns entirely blue and the colour bars become blue stripes.
4.Adjust the CHROMA control of the monitor so that there is no difference in brightness between the colour bars 1 and
7.
5.With the BLUE CHECK function ON, adjust the PHASE control of the monitor so that there is no difference in brightness between the colour bars 3 and 5.
6.If the phase control adjustment above causes a difference in brightness between the colour bars 1and 7, start again from the CHROMA control adjustment in step 4.
7.Set the monitor’s BLUE CHECK function to OFF to switch the monitor back to the standard screen (R, G and B will all appear).
E F G | HIJ K |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
48 |
