JVC GY-DV5100 instruction manual Advanced Process Screen

11. MENU SCREENS

Item			Function	Variation Range	Initial Setting
SKIN DTL	Sets the Skin Detail function to ON or OFF.			ON	OFF
DETECT	ON : Skin Detail function activated.			OFF
	OFF : Skin Detail function not activated.
	☞ See “Using the Skin Detail Function” on page 95.
V.RESOLUTION	Increases the vertical resolution.			NORMAL	NORMAL
	● NORMAL		: Vertical resolution of approx. 380 lines.	V.MAX
	● V.MAX		: Vertical resolution of approx. 450 lines.
		Note:
	In the case of “V.MAX”, colours may be found on the brighter portions
	of the object depending on its color temperature.
WHITE CLIP	Sets the point where white clipping is to take place for an input video			108%	108%
	signal with a high luminance level.			100%
	108% : The luminance level is white-clipped at the point of 108%.
	100% : The luminance level is white-clipped at the point of 100%. If the
		screen appears too white even with the point set at 108%, set the
		point at 100%.
KNEE	Sets the knee point (brightness level) when the AUTO KNEE function is			100%	100%
POINT	set to OFF.			95%
				90%
				85%
				80%
ADVANCED	Displays the ADVANCED PROCESS Screen.			–––––	–––––
PROCESS	☞ See “ADVANCED PROCESS Screen” on page 78.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the			–––––	–––––
	cursor at this position.

11. MENU SCREENS

11-7 ADVANCED PROCESS Screen

Item				Function	Variation Range	Initial Setting
CINE MODE	When set to ON, produces gamma curve close to the picture characteristics				OFF	OFF
	of movies.				ON
COLOR	Used to set the color matrix. When set to ON, color reproduction becomes				OFF	STANDARD
MATRIX	good. However, noise will increase.				STANDARD
	5 types of color matrix functions are provided.				WARM
	OFF : The function is OFF				EXTRA1
	STANDARD : Standard colour matrix				EXTRA2
	WARM : Colour adjustment with red tinge				EXTRA3
	EXTRA 1 to 3 : To set a color matrix other that those described above.
	Select the desired option.
			Note:
	When CINE MODE is ON, “FIX” is displayed and setting is not possible.
GAMMA	Compensates for the gamma curve that determines the reproducibility of				MAX (5)	NORMAL
	black color.				4
	● To enhance the black color reproducibility. However, halftones will be				to
		lost for white section			NORMAL (0)
			............... Increase the number		to
	● When reproducibility of the black color is not so important				–4
			............... Decrease the number		MIN (–5)
			Note:		OFF
	When CINE MODE is ON, “FIX” is displayed and setting is not possible.
FLARE	For correcting the entire black level when the flare phenomenon in which				MAX (10)	NORMAL
<MASTER>	light entering the lens is diffused and results in reflection that colors the				9
	black portions of the image occurs.				to
	To raise the entire black level...Increase the number				NORMAL
	To lessen the entire black level...Decrease the number				to
			Note:		–9
	When LOLUX is ON, “FIX” is displayed and setting is not possible.				MIN (–10)
FLARE <R>	For correcting the black level of Rch when the flare phenomenon in which
	light entering the lens is diffused and results in reflection that colors the
	black portions of the image occurs.
	To weaken tinge of red ... Increase the number
	To strengthen tinge of red ... Decrease the number
			Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
FLARE <B>	For correcting the black level of Bch when the flare phenomenon in which
	light entering the lens is diffused and results in reflection that colors the
	black portions of the image occurs.
	To weaken tinge of blue ... Increase the number
	To strengthen tinge of blue ... Decrease the number
			Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
SKIN COLOR	Pressing the SHUTTER dial once when the cursor is at this position
ADJUST	switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK	The CAMERA PROCESS menu screen returns when the SHUTTER dial
	is pressed with the cursor at this position.

7778