U
E
4. POWER SUPPLY
The
4-1 AC Operation
Use the JVC
4. POWER SUPPLY
The
Use the JVC
DC cable
AC power adapter
Do not use any power source with large fluctuations in the power source voltage, power sources generating noise, such as ripples or power sources with lower voltage.
1.After making sure that the power switches of the
2.Set the CHARGE/CAMERA switch of the
CAMERA.
DC cable
AC power adaptor
Do not use any power source with large fluctuations in the power source voltage, power sources generating noise, such as ripples or power sources with lower voltage.
1.After making sure that the power switches of the
2.Set the CHARGE/CAMERA switch of the
CAMERA.
3. Press the POWER switch of the
* For details, read the instruction manual of the
MEMO:
Do not remove or connect the DC cable while recording is being performed.
4-2 Battery Pack Operation (Optional)
3. Press the POWER switch of the
* For details, read the instruction manual of the
MEMO:
Do not remove or connect the DC cable while recording is being performed.
The
■Flat shape type battery pack
■Anton-Bauer battery pack
●DIONIC 90
●Propack 13/14 Series
●Trimpack 13/14 Series
●Magnum 13/14 Series
●Compack 13/14 Series
*A flat shape type battery pack cannot be connected directly to the camera. It is necessary to mount the optional battery case.
Battery case:
See “Attaching the
The
■Flat shape type battery pack
■
● DIONIC 90 | | |
● Propack 13/14 Series | | |
| ||
● Trimpack 13/14 Series | ||
| ||
● Magnum 13/14 Series | | |
● Compack 13/14 Series | | |
|
*An
Battery holder:
For details on how to mount the battery holder, see page 37.
●When the DC cable is connected to the DC IN connector, the power supply from the battery pack is interrupted and the power starts to be supplied through the DC IN connector.
●Do not connect or disconnect the DC cable while operating with a battery pack.
The following symptoms may occur if the DC cable is connected or disconnected while operating with a battery pack.
•The power is cut off for a moment when the DC cable is disconnected.
•Noise to the video and audio signals occurs. Audio signal are muted.
●When operation is continued with DC input after the battery pack capacity has been used up, set the POWER switch to OFF after the DC power is applied. Then switch ON again.
●If the
●When the DC cable is connected to the DC IN connector, the power supply from the battery pack is interrupted and the power starts to be supplied through the DC IN connector.
●Do not connect or disconnect the DC cable while operating with a battery pack.
The following symptoms may occur if the DC cable is connected or disconnected while operating with a battery pack.
•The power is cut off for a moment when the DC cable is disconnected.
•Noise to the video and audio signals occurs. Audio signal are muted.
●When operation is continued with DC input after the battery pack capacity has been used up, set the POWER switch to OFF after the DC power is applied. Then switch ON again.
●If the
35 |
