U
10. TIME CODE OPERATION
The
●Time code data cannot be output through the unit’s connectors.
10-1 Displaying Time Code
E
10. TIME CODE OPERATION
The
●Time code data cannot be output through the unit’s connectors.
COUNTER switch
LCD BRIGHT | DISPLAY |
COUNTER
FRONT
REAR
AUDIO |
| ||||
| LEVEL |
|
| AUDIO IN |
|
FRONT MIC +48V | AUDIO SELECT | TC GENE. | |||
ON | OFF |
| AUTO |
| |
| MANUAL |
| |||
The time codes or user’s bits can be shown on the LCD monitor or in the viewfinder during playback and recording as follows. (Status screen)
Setting
1. Set the TC/UB item on the LCD/VF (2/2) menu screen to |
ON. |
● Time codes or user’s bit data are displayed on the Status |
screen. |
2. |
COUNTER switch
LCD BRIGHT | DISPLAY |
COUNTER
FRONT
REAR
AUDIO |
| ||||
| LEVEL |
|
| AUDIO IN |
|
FRONT MIC +48V | AUDIO SELECT | TC GENE. | |||
ON | OFF |
| AUTO |
| |
| MANUAL |
| |||
The time codes or user’s bits can be shown on the LCD monitor or in the viewfinder during playback and recording as follows. (Status screen)
Setting
1. Set the TC/UB item on the LCD/VF (2/2) menu screen to |
ON. |
● Time codes or user’s bit data are displayed on the Status |
screen. |
2. |
Time code indication
00:00:00:00
STBY | 01/02/03 01:23:45 |
Status 1 screen
Example
Time code indication
00:00:00:00
User’s bits indication
FF EE DD 20
Whether time codes or user’s bit data should be displayed |
is selected with the COUNTER switch inside the cover on |
the side. |
TC : Time codes are displayed. |
The symbol between the seconds and the frame |
differs with the framing mode. (Colon or dot) |
UB : User’s bit data is displayed. |
Time code entered from the DV connector |
■Time code entered from the DV connector
Pressing the STOP button for 1 second in the EJECT or stop mode displays the time code data or user’s bit data input from the DV terminal on the Status screen.
DTCG : The time code data from the DV terminal
DUBG : The user’s bit data from the DV terminal
To return to display of the original time code or user’s bit, press the STOP button.
(Display of the normal time code or user’s bit is also restored by performing VTR operation.)
MEMO:
●The time code and user’s bit input from the DV terminal are not recorded. The data generated by the camera’s time code generator is recorded.
●To maintain the continuity of time code data, use with the TC GENE. switch set to REGEN mode when recording input signal from the DV terminal.
Time code indication
00:00:00:00
STBY | 01/02/03 01:23:45 |
Status 1 screen
Example
Time code indication
00:00:00:00
User’s bits indication
FF EE DD 20
Whether time codes or user’s bit data should be displayed |
is selected with the COUNTER switch inside the cover on |
the side. |
TC : Time codes are displayed. |
UB : User’s bit data is displayed. |
■ Time code entered from the DV connector |
Pressing the STOP button for 1 second in the EJECT or stop |
mode displays the time code data or user’s bit data input |
from the DV terminal on the Status screen. |
DTCG : The time code data from the DV terminal |
DUBG : The user’s bit data from the DV terminal |
To return to display of the original time code or user’s bit, |
press the STOP button. |
(Display of the normal time code or user’s bit is also restored |
by performing VTR operation.) |
MEMO:
●The time code and user’s bit input from the DV terminal are not recorded. The data generated by the camera’s time code generator is recorded.
●To maintain the continuity of time code data, use with the TC GENE. switch set to REGEN mode when recording input signal from the DV terminal.
This does not apply to
67 |
