JVC GY-DV5100 instruction manual 11-10 LCD/VF Menu Screen Cont’d

11. MENU SCREENS

11-10 LCD/VF Menu Screen

The LCD/VF menu screen consists of two screens. (1/2 screen, 2/2 screen)

■LCD/VF (1/2) Menu Screen

Settings can be made on the LCD/VF (1/2) menu screen only in the Camera mode.

Item				Function	Variation Range	Initial Setting
ZEBRA	Switches the luminance level of the subject sections where the zebra				70-80%	70-80%
	pattern is displayed.				85-95%
	70-80%			: Zebra pattern is displayed in sections with luminance	OVER 95%
				levels between 70% and 80%.	OVER 100%
	85-95%			: Zebra pattern is displayed in sections with luminance
				levels between 85% and 95%.
	OVER 95%			: Zebra pattern is displayed in sections with luminance
				levels over 95%.
	OVER 100%			: Zebra pattern is displayed in sections with luminance
				levels over 100%.
F.NO/	Selects whether or not the F-number of the lens iris/iris level mark is				OFF	OFF
IRIS IND.	displayed in the status display on the LCD monitor or in the viewfinder.				F.NO
	(Status 1 screen)				F.NO+IND.
	OFF		: F-number and iris level mark is not displayed.
	F.NO		: F-number is displayed.
	F.NO+IND. : F-number and iris level mark is displayed.
FILTER	Selects whether or not the FILTER position of the unit is displayed in the				OFF	OFF
	status display on the LCD monitor or in the viewfinder. (Status 1 screen)				ON
	OFF : FILTER position is not displayed.
	ON : FILTER position is displayed.
SAFETY	Selects whether or not the safety zone is shown on the LCD monitor or in				OFF	OFF
ZONE	the viewfinder together with the form of the safety zone indication.				NORMAL
	OFF		: Not displayed		16:9
	NORMAL : 4:3 zone is displayed.
	16:9		: 16:9 zone is displayed.
CENTER	Sets whether or not a center mark is displayed when the safty zone is				ON	ON
MARK	displayed.				OFF
	ON : Center mark is displayed.
	OFF : Center mark is not displayed.
		CAUTION:
		When the SAFETY ZONE item is set to OFF, “- - -” is indicated and
	this item cannot be selected.
NEXT PAGE	To display the LCD/VF (2/2) menu screen, align the cursor with this item				–––––	–––––
	and then press the SHUTTER dial.
PAGE BACK	The TOP MENU screen returns when the SHUTTER dial is pressed while				–––––	–––––
	the cursor is at this position.

81

11. MENU SCREENS

11-10 LCD/VF Menu Screen (Cont’d)

■LCD/VF (2/2) Menu Screen

Item					Function		Variation Range	Initial Setting
BATTERY	Selects whether the remaining battery level should be shown in minutes						VOLTAGE	VOLTAGE
INFO	[min], percentage [%] or voltage [V] in the LCD monitor or viewfinder.						TIME
	VOLTAGE :			Indicates battery voltage in 0.1 V steps.			CAPA%
	TIME		:	Remaining battery is shown in minutes [min].
	CAPA%		:	Remaining battery is shown in percentage [%].
		changes as shown below according to the remaining battery level.
		: 50% or more			: 10% to less than 50%	: 10% or less

		MEMO:
	●		When	remaining battery level is set to TIME or CAPA%, “ RES”
			is shown when battery level becomes less than 10%.
	●		Remaining battery levels in [min] and [%] can be selected when
			an Anton-Bauer Battery Holder (QR JVC DIGI) is attached.
			Remaining battery level is shown automatically in [V] when using
			other battery holders.
	●		When remaining battery level is set to TIME or CAPA% and
			information from the battery is not correct (calibration required),
			the display switches between voltage [V] and “ CAL” every 2
			seconds.
TAPE	Selects whether or not the remaining tape time (minutes) is shown in the				OFF	ON
REMAIN	status display on the LCD monitor or in the viewfinder.				ON
	(Camera mode: Status 1 screen, VTR mode: Status screen)
	OFF : Not displayed.
	ON		: Displayed.
TC/UB	Selects whether or not the time code or user’s bits data should be shown				OFF	OFF
	in the status display on the LCD monitor or in the viewfinder.				ON
	(Camera mode: Status 1 screen, VTR mode: Status screen)
	OFF : Not displayed.
	ON		: Displayed.
	* Whether the time code or user’s bits data is shown is selected with the
	COUNTER switch.
AUDIO	Selects whether the audio level meters should be shown in the status				OFF	OFF
	display on the LCD screen and the viewfinder screen.				ON
	(Camera mode: Status 1 screen, VTR mode: Status screen)
	OFF : Not displayed.
	ON		: Displayed.
LCD COLOR	Adjusts the color saturation of the LCD monitor.				MAX (5)	NORMAL
					4
					to
					NORMAL
					to
					–4
					MIN (–5)
LCD	Adjusts the contour of the LCD monitor.				MAX (5)	NORMAL
PEAKING					4
					to
					NORMAL
					to
					–4
					MIN (–5)
PAGE BACK	To return to the LCD/VF (1/2) menu screen, align the cursor with this				–––––	–––––
	position and then press the SHUTTER dial.

82