JVC GY-DV5100 instruction manual Charging the Built-in Battery, How to charge

5. PREPARATIONS

5-5 Charging the Built-in Battery

The built-in, rechargeable backup battery retains the date and time and the time code data. The built-in battery is constantly being charge whenever the GY-DV5100 is connected to a power supply, but it gradually discharges while the GY-DV5100 is disconnected from a power supply. The battery will be fully discharged when the GY-DV5100 is not used for about three months, in which case the set date and time and time code data are reset. In this case, recharge the built-in battery and then set the date and time and time code data again.

However, it is possible to use the GY-DV5100 even if the bulit-in battery is discharged but the date and time and time code data cannot be recorded.

■How to charge

AC outlet

AA-P250

DC cable

AC power adapter

1.Connect the provided AC adapter AA-P250 to the GY-DV5100 and an AC outlet or mount a charged battery on the GY-DV5100.

2.Set the POWER switch on the GY-DV5100 to “OFF” or “ON” (charging takes places with the POWER switch set to either of the positions.)

3.Leave the equipment in this condition for about 4 hours.

● The built-in battery will remain charged for about 3 months after being charged for about 4 hours.

46