11. MENU SCREENS
11-14 OTHERS Menu Screen
The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)
■OTHERS (1/2) Menu Screen
Item |
| Function | Variation Range | Initial Setting |
|
|
|
| |
OUTPUT | Selects whether characters should be displayed on the screen of a monitor | OFF | OFF | |
CHAR. | connected to MONITOR OUT connector or Y/C OUT connector. | ON |
| |
| OFF : No |
|
| |
| ON : |
|
| |
|
|
|
| |
DV REC | Selects whether or not the VTR trigger command should be output through | OFF | ON | |
TRIGGER | the DV connector. Set to ON when the | ON |
| |
| recorded on another component for backup. |
|
| |
| OFF : VTR trigger command is not output. |
|
| |
| ON : VTR trigger command is output. |
|
| |
| * Set this item to OFF, when the Backup Recording function of |
|
| |
| or |
|
| |
|
|
|
| |
LONG PAUSE | Selects the time (minutes) before the tape protect mode (drum head | 3MIN | 5MIN | |
TIME | rotation stopped) is engaged when the | 5MIN |
| |
| 3MIN | : 3 minutes |
|
|
| 5MIN | : 5 minutes |
|
|
| * When used in a cold environment or when the stopped or STILL status |
|
| |
| continues, the setting will be 3 minutes or less regardless of the setting |
|
| |
| on the menu. |
|
| |
|
|
|
| |
REM FF/REW | Selects the operation when the FF or REW command is received when | FF/REW | FF/REW | |
MODE | the | SEARCH |
| |
| FF/REW : Fast forward or rewinding is executed. Normally, this setting |
|
| |
|
| is used. |
|
|
| SEARCH : FWD search or REV search is executed. |
|
| |
|
| Use this setting when detection of the beginning of programs |
|
|
|
|
|
| |
|
| to FF/REW. |
|
|
|
|
|
| |
STEP SLOW | Selects the amount of frames advanced in the STILL mode. | FIELD | FRAME | |
MODE | (Frame advance is only available with an external remote control signal.) | FRAME |
| |
| FIELD | : |
|
|
| FRAME : |
|
| |
|
|
|
| |
NEXT PAGE | To display the OTHERS (2/2) menu screen, align the cursor with this item | |||
| and then press the SHUTTER dial. |
|
| |
|
|
|
| |
PAGE BACK | The TOP MENU screen returns when the SHUTTER dial is pressed while | |||
| the cursor is at this position. |
|
| |
|
|
|
|
|
11. MENU SCREENS
■OTHERS (2/2) Menu Screen
Item |
| Function | Variation Range | Initial Setting |
ALARM VR | Selects whether or not alarm sound is emitted and the volume of the | OFF | MIDDLE | |
LEVEL | alarm sound. | LOW |
| |
| The alarm sound is output through the monitoring loudspeaker and the | MIDDLE |
| |
| PHONES jack. | HIGH |
| |
| OFF | : Sound is not output. |
|
|
| LOW | : Alarm sound is soft. |
|
|
| MIDDLE : Alarm sound is normal. |
|
| |
| HIGH | : Alarm sound is loud. |
|
|
|
|
|
| |
BATTERY | To be set in accordance with the used battery back type. | 12V | 14.4V | |
TYPE | 12V | : Choose this setting when using 12 V battery (12VDC Flat shape | 13.2V |
|
|
| type). | 14.4V |
|
| 13.2V | : Choose this setting when using 13.2 V battery |
|
|
|
| Trimpack 13, Propack 13, Magnum 13, Compack 13). |
|
|
| 14.4V | : Choose this setting when using 14.4 V battery |
|
|
|
| DIONIC 90, Trimpack 14, Propack 14, Magnum 14, Compack |
|
|
|
| 14). |
|
|
●If this setting is wrong or neglected, the unit’s display of remaining battery power and generation of battery alarm will not work correctly.
●This setting is valid when a battery pack is used. It is invalid when a DC power supply is used.
FRONT TALLY | Selects the lighting method of the TALLY lamp in the viewfinder during | BLINK | BLINK | |
| recording. This setting is valid when the viewfinder’s TALLY switch is set to | ON |
| |
| ON. |
|
|
|
| BLINK : The lamp blinks from when the VTR trigger is pressed and until |
|
| |
|
| recording starts. The lamp lights steadily during recording. |
|
|
| ON | : The lamp lights only during recording. |
|
|
|
|
|
| |
BACK TALLY | Selects the lighting method of the TALLY lamp on the rear section during | OFF | BLINK | |
| recording. | BLINK |
| |
| OFF | : The lamp is always off. | ON |
|
| BLINK : The lamp blinks from when the VTR trigger is pressed and until |
|
| |
|
| recording starts. The lamp lights steadily during recording. |
|
|
| ON | : The lamp lights only during recording. |
|
|
|
|
|
| |
PAGE BACK | The OTHERS (1/2) menu screen returns when the SHUTTER dial is | |||
| pressed while the cursor is at this position. |
|
| |
|
|
|
| |
DRUM HOUR | Displays the accumulated time that the drum has been in operation. To be | |||
| used as a yardstick for periodical maintenance. |
|
| |
| The cursor ( ) cannot be moved to this item. |
|
| |
86 | 87 |
