Gain ALC, Lolux ON, Lolux OFF, Zebra ON, Zebra OFF

When the Gain or Shutter Speed is changed manually, the setting condition is displayed for about 3 seconds at the time the change is made.

Setting Condition	Contents of Indications
When the gain value is changed	GAIN –3 dB, 0dB, 3dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB.
When gain is ALC	GAIN ALC
When the LOLUX mode is ON/OFF	LOLUX ON, LOLUX OFF
When the AUTO KNEE is ON/OFF	AUTO KNEE ON, AUTO KNEE OFF
When the FULL AUTO is ON/OFF	FULL AUTO ON, FULL AUTO OFF
When the ZEBRA is ON/OFF	ZEBRA ON, ZEBRA OFF
When the shutter speed is changed	SHUTTER 1/7.5, 1/15, 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
	1/10000
When the variable shutter speed is changed	V. SHUTTER 1/60.1 to 1/2084.6
When the shutter is OFF	SHUTTER OFF
(Shutter speed: 1/60)
When the white balance value is changed	(Example) WHITE BAL A <3200K>
	Numeric value : Any of 2300, 2500, 2800, 3000, 3200, 3400, 3700, 4300, 5200,
	5600, 6500, 8000

In addition to the information on the Status 0 screen, this screen displays the following items.

No.	Item				Contents
0	Voltage indication	(Example) 12.2V: Indicates battery voltage in 0.1V steps.
	or	(Example)		100%: Remaining battery is shown in percentage [%].


	Battery indication	(Example)		60min: Remaining battery is shown in minutes [min].
		Select the display method with the BATTERY INFO item on the LCD/VF
		(2/2) menu. ☞ See page 82
A Time Code (TC)/User’s Bits (UB) indication		Indicates the time code (h:m:s:frame) or user’s bits data.
		(Example) Time code			TC 00 : 00 : 00	:	00	Non-drop frame: Colon (:)
			User’s bits					Drop frame: Dot (.)
			User’s bits		UB FF EE DD 20
		Whether or not to display this item is set with the TC/UB item on the LCD/
		VF (2/2) menu screen. Whether the time code or user’s bits should be
		shown is selected with the COUNTER switch inside the side cover.
B	Remaining tape indication	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3
		minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on
		the LCD/VF (2/2) menu screen.

*When inserting a brand-new tape, the remaining tape time is not indicated. When the tape has been run, the indication will appear.

*The remaining tape indication is to be regarded only as a guide.

*When the unit is used at low temperatures, it may take a while before the indication of the remaining tape time appears.

C Audio sampling frequency indication	32 K : Indicated when the AUDIO MODE item on the AUDIO/VIDEO menu
	screen is set to 32 K. (Audio is recorded with 12-bit, 32 kHz
	sampling.)
	48 K : Indicated when the AUDIO MODE item on the AUDIO/VIDEO menu
	screen is set to 48 K. (Audio is recorded with 16-bit, 48 kHz
	sampling.)
D Audio level meter indication	Displays the CH-1, CH-2 audio level meters.
	Whether or not to display this item is set with the AUDIO DISPLAY item on
	the LCD/VF (2/2) menu.
E Standard audio level indication	The level at which audio is recorded on the tape is indicated by “■”.
	–20dB, –12dB		–20dB –12dB
			❘	❘
	☞ See “AUDIO REF. LEVEL” on page 80.	CH 1
			■ ■ ■ ■ ■

		CH 1 ■ ■ ■ ■ ■ – – – +
		CH 2 ■ ■ ■ ■ ■ – – – +

9 Event Indication

When the Gain or Shutter Speed is changed manually, the setting condition is displayed for about 3 seconds at the time the change is made.

Setting Condition	Contents of Indications
When the gain value is changed	GAIN –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB.
When gain is ALC	GAIN ALC
When the LOLUX mode is ON/OFF	LOLUX ON, LOLUX OFF
When the AUTO KNEE is ON/OFF	AUTO KNEE ON, AUTO KNEE OFF
When the FULL AUTO is ON/OFF	FULL AUTO ON, FULL AUTO OFF
When the ZEBRA is ON/OFF	ZEBRA ON, ZEBRA OFF
When the shutter speed is changed	SHUTTER 1/6.25, 1/12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
	1/4000, 1/10000
When the variable shutter speed is changed	V. SHUTTER 1/50.1 to 1/2067.8
When the shutter is OFF (Shutter speed: 1/50)	SHUTTER OFF
When the white balance value is changed	(Example) WHITE BAL A <3200K>
	Numeric value : Any of 2300, 2500, 2800, 3000, 3200, 3400, 3700, 4300,
	5200, 5600, 6500, 8000

In addition to the information on the Status 0 screen, this screen displays the following items.

No.	Item				Contents
0	Voltage indication	(Example) 12.2V : Indicates remaining battery level in 0.1V steps.
	or	(Example)		100% : Remaining battery is shown in percentage [%].


	Battery indication	(Example)		60min : Remaining battery is shown in minutes [min].
		Select the display method with the BATTERY INFO item on the LCD/VF
		(2/2) menu. ☞ See page 82.
A Time Code (TC)/User’s Bits (UB) indication		Indicates the time code (h:m:s:frame) or user’s bits data.
		(Example) Time code			TC 00 : 00 : 00 : 00
			User’s bits		UB FF EE DD 20
		Whether or not to display this item is set with the TC/UB item on the LCD/
		VF (2/2) menu screen. Whether the time code or user’s bits should be shown
		is selected with the COUNTER switch inside the side cover.
B	Remaining tape indication	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3
		minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on
		the LCD/VF (2/2) menu screen.

*When inserting a brand-new tape, the remaining tape time is not indicated. When the tape has been run, the indication will appear.

*The remaining tape indication is to be regarded only as a guide.

*When the unit is used at low temperatures, it may take a while before the indication of the remaining tape time appears.

C Audio sampling frequency indication	32 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
	is set to 32 K. (Audio is recorded with 12-bit, 32 kHz sampling.)
	48 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
	is set to 48 K. (Audio is recorded with 16-bit, 48 kHz sampling.)
D Audio level meter indication	Displays the CH-1, CH-2 audio level meters.
	Whether or not to display this item is set with the AUDIO item on the LCD/
	VF (2/2) menu.
E Standard audio level indication	The level at which audio is recorded on the tape is indicated by “■”.
	–20dB, –12dB		–20dB –12dB
	☞ See “AUDIO REF. LEVEL” on page 80.	CH 1	❘	❘
	☞ See “AUDIO REF. LEVEL” on page 80.		■ ■ ■ ■ ■
			■ ■ ■ ■ ■
		CH 1 ■ ■ ■ ■ ■ – – – +
		CH 2 ■ ■ ■ ■ ■ – – – +

E-23

JVC GY-DV5100 Gain ALC, Lolux ON, Lolux OFF, Auto Knee ON, Auto Knee OFF, Zebra ON, Zebra OFF