U
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
E
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
6-1 Camera Settings
3. 
1.POWER SUPPLY
1 First place a charged battery pack in the battery case on the rear section of the unit. If battery pack is not used, connect DC power to the DC INPUT connector on the
rear section of the unit using the AC power adapter (AA- P250) to supply DC 12 V current.
2 Set the POWER switch to ON.
3. 
1.POWER SUPPLY
1 First place a charged battery pack in the battery case on the rear section of the unit. If battery pack is not used, connect DC power to the DC INPUT connector on the
rear section of the unit using the AC power adapter (AA- P250) to supply DC 12 V current.
2 Set the POWER switch to ON.
2.
GAIN | H M L | O UTPU T BARS C AM | OFF ON AUT OKN EE | WHT. BAL | PRST A B |
MODE
|
|
| 2. SWITCH positions |
|
|
| A. MODE switch: Camera mode (CAM indicator should be |
|
|
| on). |
| 1. |
| B. [GAIN] switch: Set to L. The L position is always 0 dB. |
| CAM | C. [OUTPUT] switch: Set to | |
|
| D. [WHT. BAL] (Auto White Balance) switch: Set to A or B. | |
POWER | VTR | indicator | |
ON | OFF |
| |
|
|
| 3. Set the lens’ iris mode switch to “A” (AUTO IRIS side) |
|
|
| 4. Choose the proper color temperature conversion filter. |
2.
GAIN | H M L | OUTPUT BARS CA M |
OFF ON AUTOKNEE | WHT.BAL |
| 1. | CAM | |
POWER | VTR | indicator | |
ON | OFF | ||
|
PRST A B | MODE |
2.SWITCH positions
A.MODE switch: Camera mode (CAM indicator should be on).
B.[GAIN] switch: Set to L. The L position is always 0 dB.
C.[OUTPUT] switch: Set to
D.[WHT. BAL] (Auto White Balance) switch: Set to A or B.
3.Set the lens’ iris mode switch to “A” (AUTO IRIS side)
4.Choose the proper colour temperature conversion filter.
B C D
A
| FILTER | Suitable Location |
|
|
|
1 | 3200K | Indoors, dark outdoors |
|
|
|
2 | 5600K+1/8ND | Outdoors under clear sky |
|
|
|
3 | 5600K | Outdoors |
|
|
|
4 | 5600K+1/64ND | Outdoors under clear sky |
|
|
|
B C D A
| FILTER | Suitable Location |
|
|
|
1 | 3200K | Indoors, dark outdoors |
|
|
|
2 | 5600K+1/8ND | Outdoors under clear sky |
|
|
|
3 | 5600K | Outdoors |
|
|
|
4 | 5600K+1/64ND | Outdoors under clear sky |
|
|
|
5.Using the SHUTTER dial, set the shutter speed to OFF (1/60).
VF | 4. |
| 5. |
5.Using the SHUTTER dial, set the shutter speed to OFF (1/ 50).
VF | 4. |
| 5. |
6-2 Screen Size (4:3/LETTER/SQUEEZE) Mode Selection
The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.
☞See page 75.
●To record using the standard screen, set ASPECT RATIO to 4:3.
●When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image cut. In this case, the viewfinder screen or LCD will show the 16:9 aspect ratio image with the upper and lower parts of the image cut.
●When the ASPECT RATIO is set to SQUEEZE, 16:9 image is output vertically squeezed to fit 4:3 screens.
MEMO:
●The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the SAFETY ZONE item on the LCD/VF (1/2) menu screen. ☞ See page 81.
●When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT terminal.
●When setting DATE REC in the TIME/DATE menu screen to “BARS” or “BARS+CAM”, the screen size will be fixed at an aspect ratio of 4:3.
The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.
☞See page 75.
●To record using the standard screen, set ASPECT RATIO to 4:3.
●When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image cut. In this case, the viewfinder screen or LCD will sbhow the 16:9 aspect ratio image with the upper and lower parts of the image cut.
●When the ASPECT RATIO is set to SQUEEZE, 16:9 image is output vertically squeezed to fit 4:3 screens.
MEMO:
●The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the SAFETY ZONE item on the LCD/VF (1/2) menu screen. ☞ See page 81.
●When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT terminal.
●When setting DATE REC in the TIME/DATE menu screen to “BARS” or “BARS + CAM”, the screen size will be fixed at an aspect ratio of 4:3.
47 |
