U
E
5. PREPARATIONS
5-1 Turning the Power ON
MENU
AUTO IRIS | FULL AUTO | BLACK |
| LOLUX |
| BACK L |
| STRETCH | MODE |
|
| VTR | ||
| NORMAL |
| NORMAL | |
| SPOT L |
|
| CAM |
|
|
|
|
5. PREPARATIONS
MENU
AUTO IRIS | FULL AUTO | BLACK |
| LOLUX |
| BACK L |
| STRETCH | MODE |
|
| VTR | ||
| NORMAL |
| NORMAL | |
| SPOT L |
|
| CAM |
|
|
|
|
POWER VTR
POWER VTR | ON | OFF |
MODE
MODE indicator POWER switch
switch
1.Set the POWER switch to ON. The unit turns on in Camera mode.
■The operation differs according to whether the unit is in the Camera mode or in the VTR mode. When the MODE switch is pressed upward, the mode is changed.
The Camera indicator or VTR indicator comes on in accordance with the selected mode.
POWER VTR
POWER VTR | ON | OFF |
MODE POWER switch switch
1.Set the POWER switch to ON. The unit turns on in Camera mode.
■The operation differs according to whether the unit is in the Camera mode or in the VTR mode. When the MODE switch is pressed upward, the mode is changed.
The Camera indicator or VTR indicator comes on in accordance with the selected mode.
MODE indicator
Mode | Operation |
Camera mode | The |
| or on the LCD monitor. When a recordable videocassette is loaded, the |
| the |
| indication area of the LCD monitor or in the viewfinder. In this condition, press the VTR trigger |
| button to start recording. |
| * Playback is also possible in the Camera mode. |
| Playback operation becomes possible when the STOP button is pressed to set the VTR |
| operation mode indicator to indicate STOP. |
|
|
VTR mode | The |
| viewfinder or on the LCD monitor. When a videocassette is loaded, the |
| the stop mode. |
| “STOP” is displayed in the VTR operation mode indication area of the LCD monitor or in the |
| viewfinder. |
| DV input is possible through the DV terminal. |
|
|
Turning the Power OFF
1.Place the
2.Set the POWER switch to OFF.
3.Remove the battery pack or the power supply to the DC IN connector. (When the camera is not going to be used for a longer period.)
CAUTION:
●Do not set the POWER switch to OFF while recording is taking place.
Confirm that the STBY or STOP indication is shown in the VTR operation mode indication area before the power is turned off. Should the POWER switch accidentally be set to OFF during a recording, wait at least 5 seconds before turning the power on again.
●Always set the POWER switch to OFF before disconnecting the power supply
Do not turn the battery pack or AC power supply OFF while the POWER switch on the camera is still set to ON.
Mode | Operation |
Camera mode | The |
| or on the LCD monitor. When a recordable videocassette is loaded, the |
| the |
| indication area of the LCD monitor or in the viewfinder. In this condition, press the VTR trigger |
| button to start recording. |
| * Playback is also possible in the Camera mode. |
| Playback operation becomes possible when the STOP button is pressed to set the VTR |
| operation mode indicator to indicate STOP. |
|
|
VTR mode | The |
| viewfinder or on the LCD monitor. When a videocassette is loaded, the |
| the stop mode. |
| “STOP” is displayed in the VTR operation mode indication area of the LCD monitor or in the |
| viewfinder. |
| DV input is possible through the DV terminal. |
|
|
Turning the Power OFF
1.Place the
2.Set the POWER switch to OFF.
3.Remove the battery pack or the power supply to the DC IN connector. (When the camera is not going to be used for a longer period.)
CAUTION:
●Do not set the POWER switch to OFF while recording is taking place.
Confirm that the STBY or STOP indication is shown in the VTR operation mode indication area before the power is turned off. Should the POWER switch accidentally be set to OFF during a recording, wait at least 5 seconds before turning the power on again.
●Always set the POWER switch to OFF before disconnecting the power supply
Do not turn the battery pack or AC power supply OFF while the POWER switch on the camera is still set to ON.
39 |
