![](/images/new-backgrounds/1196615/196615303x1.webp)
Section 7. Factory Resets
7.6 Clear EEPROM
To clear the EEPROM, perform the following steps.
Caution: Resetting the printer will clear all registers.
STEP PROCEDURE
1.Record all current dip switch positions, then place all switches in the OFF position.
2.Place the
3.Press the LINE and FEED key while simultaneously turning ON the power switch. When the printer beeps, release the keys. The following screens will appear.
initializing
rom v00.00.00.00
maintenance mode
4.Place the
factory mode
5.Press the LINE key to display the next screen.
all clear mode
6.Press the FEED key to display the next screen.
all clear
counter eeprom
7.Press the FEED key to display the next screen.
counter all clear
yes no
8.Press the LINE key to select YES or NO. If YES is selected press the FEED key to clear the EEPROM .
counter all clear completed
all clear mode
9.Power OFF the printer and confirm that all switches are in the OFF or down position.
Page | SATO CL608e/CL612e Service Manual |