
Section 9. Optional Accessories
9-3 Label Dispenser Installation
Installation of the optional Label dispenser into the printer adds the convenience of automatic label dispensing. Each label is printed, then peeled from the backing paper and presented at the front of the printer for removal by the operator. A photo electric sensor detects the presence of a completed label and signals the printer to await removal. Once the completed label is removed, this sensor signals the printer to automatically backfeed the label stock for correct alignment of the printing on the next label.
Components as Supplied in Kit
Fig. 9-8a
DISPENSER UNIT
WITH ROLLER AND
SPRINGS
DISPENSER
FEED ROLLER
Fig. 9-8b
PULLEY AND
GEAR WITH
HARDWARE
Fig. 9-8c
REWIND PULLEY
ASSEMBLY AND
BELT
Fig. 9-8d
Page | SATO CL608e/CL612e Service Manual |