SATO CL608e/CL612e manual Printer Set up, DSW2

Section 2. Configuration

Dip Switch Settings

Printer Set up

Print Mode Selection (DSW2-1):Selects between direct thermal printing on thermally sensitive paper and thermal transfer printing using a ribbon.

DSW2-1	SETTING
Off	Transfer
On	Direct Therm

DSW2

ON

OFF

1 2 3 4 5 6 7 8

Sensor Type Selection (DSW2-2):Selects between the use of a label gap or a
reflective Eye-Mark.
						DSW2
	DSW2-2	SETTING
ON
	Off	Gap	OFF
	On	Eye-Mark
			1	2	3	4	5	6	7	8

Head Check Selection (DSW2-3):When selected, the printer will check for head elements that are electrically malfunctioning.

DSW2-3	SETTING
Off	Disable
On	Enable

DSW2

ON

OFF

1 2 3 4 5 6 7 8

Hex Dump Selection (DSW2-4):Selects Hex Dump mode.
						DSW2
	DSW2-4	SETTING	ON
	Off	Disable	OFF
	On	Enable
			1	2	3	4	5	6	7	8

Receive Buffer Selection (DSW2-5):Selects the operating mode of the receive

buffer. See Section 3: Interface Specifications for more information.

					DSW2
DSW2-5	SETTING	ON
Off	1 Item	OFF
On	Multi-Job
		1	2	3	4	5	6	7	8

For more information about the cause of troubleshooting printer errors, see Section 8, Troubleshooting.

PN 9001079	SATO CL608e/CL612e Service Manual	Page 2-3
Rev. B