Section 2. Configuration
LCD Panel — Normal Mode
Cancel Print Job
If the printer has a print job(s) loaded in memory selecting YES will cause the job(s) to be cleared. The default selection is NO. Make sure that you want to cancel the print job before selecting YES as the job cannot be recovered and will have to be retransmitted to the printer.
To cancel the print, perform the following steps:
cancel print job
yes no
STEP | PROCEDURE |
1.Press the LINE key to step the underlined cursor to either No or Yes.
2.Once the correct setting is underlined, press the FEED key to accept the setting.
3.After the print job(s) have been cleared from memory, the printer will display a COMPLETED message for 3 seconds and then return to the initial ONLINE Normal Mode.
cancel print job
COMPLETED
If you wish to change any of the settings, you must enter the User mode again by taking the printer OFFLINE and simultaneously pressing FEED and LINE keys.
Page | SATO CL608e/CL612e Service Manual |
