SATO CL608e/CL612e manual Ribbon Roller Adjustment, Turn Eccentric Loosen Locking Screws

Section 5. Mechanical Adjustments

5.5 Ribbon Roller Adjustment

Required Equipment:	•	#2 Pozidrv Screwdriver
	•	10mm wrench

NOTE: Only do this adjustment after adjusting ribbon wind and unwind tension in Section 5.2.1 and 5.2.2

STEP PROCEDURE

1.Connect the power cable to the printer and AC outlet. Turn the printer ON.

2.Raise the access door and load the ribbon and label stock. Fig. 5-1

3.Loosen the locking screws. Fig. 5-9

4.Turn eccentric with wrench.

5.When the carbon ribbon moves evenly without wrinkling, tighten the locking screws.

TURN ECCENTRIC

LOOSEN

LOCKING

SCREWS

Fig. 5-9

Page 5-8 SATO CL608e/CL612e Service Manual

PN 9001079 Rev. B