SATO CL608e/CL612e manual Latched Position Unlatched, Head Latch Adjustment

Section 5. Mechanical Adjustments

5.8 Head Latch Adjustment

The set-screws which attach the head latches to the latch shaft can become loosened during the operation of your printer. If you notice light printing on the left side of your labels, check the pairs of set-screws to be sure they are securely tightened.

To correct this problem:

Close the printhead and pull both latches so they are fully engaged to the latch posts. Tighten (2) set screws per latch.

Pairs of set-screws on each end of shaft must be tightened to avoid slippage of media and light printing on the left side of the labels

LATCHED

POSITION

UNLATCHED

POSITION

Page 5-12 SATO CL608e/CL612e Service Manual

PN 9001079 Rev. B