Section 1. Overview and Specifications

Components

POWER SUPPLY UNIT

PLUG-IN INTERFACE

CARD - CENTRONICS

I/O SHOWN

1.6 Sensors and Switches

RIBBON SENSOR: This sensor is a motion detector that signals the printer when the ribbon supply is turning. This sensor is used for both the ribbon end and ribbon near end sensing.

HEAD LATCH LEVER: When the print head is opened, a micro switch is activated and the printer will stop printing. Error message will be displayed on the LCD operator panel.

Page 1-8

SATO CL608e/CL612e Service Manual

PN 9001079 Rev. B

Page 14
Image 14
SATO CL608e/CL612e manual Sensors and Switches