SATO CL608e/CL612e manual Card -MemoryCopy All y/n, Card memory Copying

Section 2. Configuration

LCD Panel — Card

Card ->MemoryCopy All Y/N

Mode

card ->MemoryCopy

all y/n

This selection allows you to copy the entire contents from PCMCIA Memory card installed in the Memory Card slot on the rear of the printer to the optional internal Expanded Memory.

STEP PROCEDURE

1.Use the LINE key to step the underlined cursor to the desired setting. IF Yes is selected, the printer will enter the Card Copy mode.

If No is selected, the display will advance to Card->MemoryCopy All mode.

2.Confirm your selection by stepping the underline cursor to the Yes selection. If you select No, the display will return to the previous

selection.

copy start

yes no

3.Press the FEED key to accept the selection. If Yes was selected, the

copy process will start.

card -> memory

copying

4.Once the copy process is completed, press the FEED key to advance

the display.

card ->memory completed

5.If an error is encountered in the copy process, one of the following messages will be displayed on the second line.

	CARD COPY/FORMAT
	XXXXXXX ERROR
R/W Error Indicates a Read/Write error occurred
No Card Error	Indicates no card was recognized
Mem Full Error	Indicates that there is insufficient
	memory available

Page 2-20 SATO CL608e/CL612e Service Manual

PN 9001079 Rev. B