![](/images/new-backgrounds/1196615/19661575x1.webp)
Section 2. Configuration
LCD Panel — Advanced Mode
Ignore CR/LF
ignore cr/lf
YES NO
This setting tells the printer to strip out all carriage return/line feed pairs (CRLF) from the data stream, including graphics and 2D bar codes. It is used primarily to maintain compatibility with earlier models of SATO printers.
STEP | PROCEDURE |
1.Use the LINE key to step the underlined cursor to either YES or NO.
2.Once the desired setting is underlined, press the FEED key to accept the setting and advance to the Character Pitch display.
Character Pitch
character pitch prop fixed
This setting allows you to set the default character pitch to either fixed character spacing or proportional character spacing.
STEP | PROCEDURE |
1.Use the LINE key to step the underlined cursor to the desired setting.
2.Once the desired setting is underlined, press the FEED key to accept the setting and return to the Advance Mode screen.
Note: This command can be overriden by the <ESC>PR or <ESC>PS Character Pitch Commands.
Exit Advanced Mode
Advanced Mode
To exit the Advanced mode, power off the printer then back on.
Page | SATO CL608e/CL612e Service Manual |