JVC GY-DV5100 Rear Section Cont’d, Battery holder, Battery release lever, Breaker Breaker button

2. CONTROLS, INDICATORS AND CONNECTORS

2-5 Rear Section (Cont’d)

i

o

!0

8Battery holder

Mount Anton-Bauer battery pack here.

9Battery release lever

This release lever is used to detach the battery pack.

☞ See “Attaching and Detaching an Anton-Bauer Battery Pack” on page 36.

0[BREAKER] Breaker button

The breaker trips when the power consumption exceeds the capacity.

If the breaker trips, confirm that there are no abnormalities and that the power consumption does not exceed the rated wattage. If no abnormalities are detected, press the BREAKER button before turning the power ON again to put the camera in the operating status.

If the unit still does not work normally, please consult the person in charge of professional video equipment at your nearest JVC-authorized service agent.

U

E

2. CONTROLS, INDICATORS AND CONNECTORS

2-5 Rear Section (Cont’d)

oPUSH

i

LINE OUT

CH-1

Y/C OUT MONITOR OUT

!0

CH-2

8Battery holder

Mount Flat shape type battery pack here.

☞ See “Using Flat Shape Type Battery Pack (optional)” on page 36.

9Battery holder lock release knob

This knob is used to open the battery case cover. Press the knob while turning to open the cover.

0[BREAKER] Breaker button

The breaker trips when the power consumption exceeds the capacity.

If the breaker trips, confirm that there are no abnormalities and that the power consumption does not exceed the rated wattage. If no abnormalities are detected, press the BREAKER button before turning the power ON again to put the camera in the operating status.

If the unit still does not work normally, please consult the person in charge of professional video equipment at your nearest JVC-authorized service agent.

20 E-20