Technika 19-811 Viewing the Connections Side Connectors, Power Connection, Aerial Connection

4.PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.

5.S/PDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

Viewing the Connections - Side Connectors

1.The CI Slot is used for inserting a CI card. A CI card allows you to view all the

channels that you subscribe to. For more information, see “Conditional Access” section.

2. Side USB input.

3. Side audio-video connection input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW input (located on the plural side) of the supplied AV connection cable. Colours of the connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.

4.The headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones.

5. Volume/ Programme/ Source and Standby-On switch

MODE o

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

HDMI1

SPDIF

Coax.OUT

English - 8 -

For assistance, please call our Tesco Electrical Helpline on 0845 456 6767

01_MB62_[GB]_woypbpr_3902UK_IDTV_BRONZE19_19910LED_10076214 _ 50202491.indd 8 03.11.2011 17:18:03